3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!
Sponsored by:
Sponsored by: DashLynx

Installing LOUD horn

Thread Tools
 
Search this Thread
 
Old 10-13-2007, 02:36 AM
  #1  
Registered User
Thread Starter
 
LVEvan's Avatar
 
Join Date: Apr 2007
Location: las vegas
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Installing LOUD horn

Has anybody installed a louder horn on their cummins? if so i need to know how to hook it up using my existing horn switch any help would be greatly appreciated
Old 10-13-2007, 02:10 PM
  #2  
Registered User
 
lobes1985's Avatar
 
Join Date: Sep 2007
Location: Gansevoort,NY
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
pick up this months issue of diesel power they have a "how to" article in there
Old 10-13-2007, 08:17 PM
  #3  
Registered User
 
Tocapet's Avatar
 
Join Date: Mar 2007
Location: Fort Worth, Texas
Posts: 299
Likes: 0
Received 0 Likes on 0 Posts
check out this guy's horn & see if it's loud enough for ya.
http://www.youtube.com/watch?v=rjR5K...elated&search=
Old 10-13-2007, 08:19 PM
  #4  
Chapter President
 
cbrahs's Avatar
 
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes on 4 Posts
im going to have to get off my tail and get my train horns hooked up.
Old 10-14-2007, 01:14 PM
  #5  
Registered User
 
Asher's Avatar
 
Join Date: Dec 2004
Location: STL Missouri
Posts: 557
Received 0 Likes on 0 Posts
I bought a kit off of e-bay from Seige Engineering (called hammer4) and it came with a 5 liter compressor/tank unit. I got lucky and was able to make a couple small brackets and fit the compressor up inside the drivers side fender and mounted the horns under the passenger fender just behind the bumper and facing downwards... Since the compressor was so close to the battery the power wiring was only about 2 foot long. For a quick / easy switch I just spliced the factory horn wire and attached it to the air horn. Later I will place a button inside the cab up by the grab handle for the air horns and reconnect the factory set up for "city horns"...

The best thing about this set up is that I was able to install it in dead spaces, it was tight, but it did fit and the compressor is up high out of the way and protected from the elements and also engine heat... Also I didn't have to drill any holes in the truck, I used bolts that where already there holding up the battery mount...

Some pictures here to get an idea...
http://s111.photobucket.com/albums/n...orn%20Install/




Old 10-14-2007, 02:29 PM
  #6  
Registered User
 
SMOKIN-U's Avatar
 
Join Date: Jul 2007
Location: missouri
Posts: 439
Likes: 0
Received 0 Likes on 0 Posts
does any one know the price of one of those kits?
Old 10-14-2007, 08:11 PM
  #7  
Registered User
 
Asher's Avatar
 
Join Date: Dec 2004
Location: STL Missouri
Posts: 557
Received 0 Likes on 0 Posts
They usually e-bay $140-$165 just depends... I lost about 6 auctions before I got a set for what I wanted to pay for them...
Old 10-15-2007, 04:49 PM
  #8  
Registered User
 
chuck4334's Avatar
 
Join Date: Oct 2007
Location: tipp city,ohio
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
i installed an actual train horn on my truck. the NATHAN K5LA. they are air horns so i had to install a compressor and air tank also. i used a ford starter solenoid so the compressor wouldnt come on when the truck was off, so the batteries wouldnt run dead. i also wired it into the trucks horn button on the steering wheel.....IT IS AWESOME!!!!!!!!!! you can find the horns on ebay for about a grand, and the compressor is a vaair 550C(about 300.00). starter solenoid 25.00 air tank 80.00 and an electrically actuated switch for the air line 35.00.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
redpoint5
Performance and Accessories 2nd gen only
30
08-09-2007 03:12 AM
PEAKSTRYDE
3rd Gen High Performance and Accessories (5.9L Only)
18
01-17-2006 11:58 PM
ROCKNRAM
2nd Gen. Dodge Ram - No Drivetrain
23
09-16-2003 08:50 AM
B-Peterson
Performance and Accessories 2nd gen only
20
12-04-2002 07:03 AM
Sean S
24 Valve Engine and Drivetrain
20
11-16-2002 02:45 PM



Quick Reply: Installing LOUD horn



All times are GMT -5. The time now is 06:47 PM.