BD's r700 twins
#1
Registered User
Thread Starter
Join Date: Mar 2008
Location: new jersey
Posts: 1,030
Likes: 0
Received 0 Likes
on
0 Posts
BD's r700 twins
anyone running this twin set up. i was trying to up my psi from 52psi to about 60psi. i dont know where the adjustment is.could someone show a picture or something. thanks.
#2
Registered User
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
#5
PM you on the other forum...... adjust the wastegate rod. Take the pin off of the end of the rod allowing the rod to extend. Adjust the amount of turns you need to get to 60psi, probley 6 turns. Take an air hose and insert into the wastegate and blow air into the wastegate to extend the rod. While the air is extending the rod reattach the rod with the pin. Take it for a test drive and repeat if needed to get the psi you want...Good luck
Thread
Thread Starter
Forum
Replies
Last Post
DUKCALN
3rd Gen High Performance and Accessories (5.9L Only)
2
04-10-2008 01:58 PM
kantdrive55
3rd Gen High Performance and Accessories (5.9L Only)
23
12-15-2007 05:00 PM
kantdrive55
3rd Gen High Performance and Accessories (5.9L Only)
19
10-26-2007 12:15 AM