Anyone have the stock rear blocks for an '06 2500?
#1
Registered User
Thread Starter
Join Date: Feb 2007
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have the stock rear blocks for an '06 2500?
I'm doing some suspension work and I am in desperate need of some stock blocks for an '06 2500. There are 2 blocks on each side right above the axle perch. Those are the two I am needing. 4 total. Can anybody help out here?
#3
Registered User
Thread Starter
Join Date: Feb 2007
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
That would be awesome. I'm pretty sure you had them. I would think so anyways. There are 3 of them total on each side. One directly under the leaf springs, and two under that one. I would just make some, but I think the one in the middle has two holes for alignment pins and I think the ones on the bottom have a single pin to line it up on the spring perch.
#4
Registered User
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
I just looked and there still on my pickup, but I just ordered a Road Armor pumper and the if it pulls the nose down much I will probably take one or two of them off. Ill let you know, problem is I just ordered the bumper and it wont be here for a while.
#5
Registered User
Thread Starter
Join Date: Feb 2007
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody else have these blocks by chance? I've called the local suspension shops but none of them seem to have the blocks in stock. I know I can get them through the dealer, but chances are they will be outrageous on the prices. I should have made sure to keep the dang things.....
#6
Registered User
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,627
Likes: 0
Received 0 Likes
on
0 Posts
Does anybody else have these blocks by chance? I've called the local suspension shops but none of them seem to have the blocks in stock. I know I can get them through the dealer, but chances are they will be outrageous on the prices. I should have made sure to keep the dang things.....
#7
Registered User
Thread Starter
Join Date: Feb 2007
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
I'd still be willing to purchase some from a guy on here if possible. I have a hard time finding time to do anything.
Thread
Thread Starter
Forum
Replies
Last Post
ogopogo
3rd Generation Ram - Non Drivetrain - All Years
8
04-11-2013 07:15 PM
Katmandu
12 Valve Engine and Drivetrain
10
01-16-2006 08:30 AM