Where is the best place to install a GDP filter and F/W separator?
01-06-2011, 10:42 AM
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: Ontario, Canada
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Where is the best place to install a GDP filter and F/W separator?
I want to increase my fuel filtration with a 2 micron system from GDP. My 03 has the APPS so the under the air horn application does not work. I don't want to use the frame rail by the front tire or by the transfer case. I already have a stand alone FASS 95 ahead of the left rear wheel - I don't know if I can get the new filter and F/W to fit in there was well. Anyone tackled this problem yet? Any pictures of your setup would be more helpful.
01-07-2011, 11:05 AM
#2
Registered User
Join Date: Nov 2003
Location: South TX
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
My filter placement
I placed mine on the inside of the frame rail about even with the middle of the driver's front door. Easy installation and access when changing filters. If you do a lot of 4 wheeling mounting the filters there could be a bit exposed. Most of my driving is on the pavement. Need the 4 wheel drive for the snow conditions when I go north, way north.
L8r,..........dogger
L8r,..........dogger
Thread
Thread Starter
Forum
Replies
Last Post
truckjunkie
3rd Gen Engine and Drivetrain -> 2003-2007
4
12-29-2010 04:45 PM
GaCamper
3rd Gen High Performance and Accessories (5.9L Only)
2
01-11-2009 07:05 PM