different or types of exhausts you've had/have on your 1st gen? and pics
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
different or types of exhausts you've had/have on your 1st gen? and pics
Well I know we all have to get pretty creative with our 1st gens. And if your like me, You've had a lot of different exhaust setups before you've found the one you liked. So I got thinkin we should have an exhaust setup thread that would give people some ideas or what people have done with their exhaust. Whether its out the back, out the bed, out the hood, or however you have it or have had it, post a pic!
I'll start off with my many, some crazy exhaust jobs I've had on my 1st gen
When i first got the truck, just straight piped 3" out the back
Then my tailpipe rusted out so I decided to take all the rusty 3" out and welded part of my tailpipe to my downpipe and it fit just right. I angle cut the little 3 1/2" tip and I ran it out right underneath my door, behind my front tire, this was one of the loudest, but yet creative, and funnest exhausts i had!
The 8" CAT stack I was gonna put on, but never hooked it up and sold it for a good price
Then i got a hy35 turbo and ran a 2nd gen 4" downpipe and made a 4" t-case pipe and turned it down right behind the cab (only had it about a month)
Then I got an HE351 turbo and made a 5" hood stack, the cheapest, easiest, simplest, and coolest exhaust i've done!
I think the hood stack is the longest time I've had my exhaust a certain way, over 8 months now!
I'll start off with my many, some crazy exhaust jobs I've had on my 1st gen
When i first got the truck, just straight piped 3" out the back
Then my tailpipe rusted out so I decided to take all the rusty 3" out and welded part of my tailpipe to my downpipe and it fit just right. I angle cut the little 3 1/2" tip and I ran it out right underneath my door, behind my front tire, this was one of the loudest, but yet creative, and funnest exhausts i had!
The 8" CAT stack I was gonna put on, but never hooked it up and sold it for a good price
Then i got a hy35 turbo and ran a 2nd gen 4" downpipe and made a 4" t-case pipe and turned it down right behind the cab (only had it about a month)
Then I got an HE351 turbo and made a 5" hood stack, the cheapest, easiest, simplest, and coolest exhaust i've done!
I think the hood stack is the longest time I've had my exhaust a certain way, over 8 months now!
#4
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Yep it stays clean, haven't ever had a problem with soot getting on roof or windshield, the smoke just goes right up and over. Especially while goin down the road from the wind draft.
I love your truck by the way thats my dream truck! a 78 or 79 ford with a cummins in it! nice work!
I love your truck by the way thats my dream truck! a 78 or 79 ford with a cummins in it! nice work!
Trending Topics
#8
Registered User
#10
The 'Ford does not own Cummins' enforcer.
when i first bought my truck had this 6" mitre
then i bought this 7" bullhauler and i put it in different places
then went to the 5" duals
and then here is the 4" mitre which this is the longest time i kept one exhaust on
then i bought this 7" bullhauler and i put it in different places
then went to the 5" duals
and then here is the 4" mitre which this is the longest time i kept one exhaust on
#11
I grad-u-ated frum Claudes skool of tpying....
3 inch [ya iknow he351/4" pipe in planning stage] pipe with a dynamax sliver bullit, i USED to have a flowmaster 70 ser on it but it was too quiet it also raised EGT's an lowed boost i dropped 75+ degrees an gained 2 or 3 lbs boost with the dynamax other then this, stock and having it cut off right behind the cab with th muffler delete
#12
Registered User
#13
Registered User
Join Date: Jan 2010
Location: Why-Homing
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
#14
Registered User
Join Date: Aug 2006
Location: Cresson/Stephenville Texas
Posts: 2,436
Likes: 0
Received 0 Likes
on
0 Posts
Ive had too many to put pics up, but Ill put my fav up (stacks).
In order:
Stock 3",
3" dp to 4" ,
its been dumped anywhere from cab to the axle,
built 4" dp and ran it alone for a week (LOUD!!!)
then put the rest of 4" on,
Ran it straight piped for a while,
then the 5" black stacks,
then back to 4" with the muffler,
had that the longest, til today when everything from the cab back fell off...
In order:
Stock 3",
3" dp to 4" ,
its been dumped anywhere from cab to the axle,
built 4" dp and ran it alone for a week (LOUD!!!)
then put the rest of 4" on,
Ran it straight piped for a while,
then the 5" black stacks,
then back to 4" with the muffler,
had that the longest, til today when everything from the cab back fell off...
#15
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bountiful, Utah
Posts: 2,128
Likes: 0
Received 0 Likes
on
0 Posts
Yeah i know how that goes, I had just a 2nd gen 4" downpipe on my truck before i built the t case pipe when i put that hy35 on and it was freakin loud! I only had it like that for a day cuz it was so loud! it would rattle the floor of the cab when the boost came on and it painted my transfer case and frame black