Dodge Diesel - Diesel Truck Resource Forums
2 2015/10/04 16:30:57
2015011895175144
2015011895175144
1 2015/05/03 23:14:52
IMG 0386
IMG 0386
1 2015/05/03 23:14:52
0 2017/01/07 23:28:57
0 2016/03/21 08:30:39
0 2016/03/21 08:30:33
0 2016/03/21 08:30:24
0 2016/03/21 08:30:11
I think it's turning out well
I think it's turning out well
0 2016/03/16 18:31:10
I used Fat Matt XXXtreme rattle trap. Thicker than Dynomat and went on very well. 1st time doing this so it was a learning experience
I used Fat Matt XXXtreme rattle trap. Thicker than Dynomat and went on very well. 1st time doing this so it was a learning experience
0 2016/03/16 18:30:19
All clean and wiped down with some industrial non residue glass cleaner
All clean and wiped down with some industrial non residue glass cleaner
0 2016/03/16 18:29:30
Pulling seat, center console and carpet.
Pulling seat, center console and carpet.
0 2016/03/16 18:28:37
Will paint most of the brackets and accessories black with the pump and valve covers
Will paint most of the brackets and accessories black with the pump and valve covers
0 2016/03/15 19:59:08
Just need to scrape wipe and tape then make our purdy
Just need to scrape wipe and tape then make our purdy
0 2016/03/15 19:58:30
Couldn't get a wrench or socket on the bottom bolt for power steering pump. Will pick up some crows feet tomorrow and get it off
Couldn't get a wrench or socket on the bottom bolt for power steering pump. Will pick up some crows feet tomorrow and get it off
0 2016/03/15 19:57:45
0 2016/03/15 06:13:18
Got it on the stand. Time to start disassembly and paint prepping
Got it on the stand. Time to start disassembly and paint prepping
0 2016/03/05 17:48:07
Another shot all buttoned up and what was taken out.
Another shot all buttoned up and what was taken out.
0 2016/02/28 19:56:08
All buttoned up
All buttoned up
0 2016/02/28 19:54:45
Here's what i used going back to stock. Same 5/16 wrench for the metal line, T30 Torx bit for stock screws that hold the housing on to the pump attached to a small ratchet wrench and the Torx bit with a 1/4 wrench for the tight space closest to the timing cover
Here's what i used going back to stock. Same 5/16 wrench for the metal line, T30 Torx bit for stock screws that hold the housing on to the pump attached to a small ratchet wrench and the Torx bit with a 1/4 wrench for the tight space closest to the timing cover
0 2016/02/28 19:48:10
Here it is removed. I used #5 metric Allen wrench to remove bolts. 5/16 to remove line from housing. I used extra care not to lose the little shims.
Here it is removed. I used #5 metric Allen wrench to remove bolts. 5/16 to remove line from housing. I used extra care not to lose the little shims.
0 2016/02/28 19:44:55
0 2016/02/28 19:43:23
0 2016/02/25 19:52:42
0 2016/02/25 19:08:26
0 2016/02/25 19:06:03
I'll get some daytime pictures tomorrow.
I'll get some daytime pictures tomorrow.
0 2016/02/24 18:29:48
0 2016/02/24 18:20:32
0 2016/02/24 18:19:02
Very anxious to get this truck back on the road. As most of us are I'm on a budget so it will take some time but as my ol man always says "Rhome wasn't built in a day"
Very anxious to get this truck back on the road. As most of us are I'm on a budget so it will take some time but as my ol man always says "Rhome wasn't built in a day"
0 2016/02/24 18:15:20
Pulled wiring, ac condenser, grill, radiator. I know it's more than need be but this ol truck is rough so most of the front will end up in scrap. Then make a trailer out of the bed
Pulled wiring, ac condenser, grill, radiator. I know it's more than need be but this ol truck is rough so most of the front will end up in scrap. Then make a trailer out of the bed
0 2016/02/24 18:13:11
Very anxious to get the ol truck going. As most of us are, I'm on a budget so it'll take some time bit hey, "Rhome wasn't built in a day" as my ol man always says.
Very anxious to get the ol truck going. As most of us are, I'm on a budget so it'll take some time bit hey, "Rhome wasn't built in a day" as my ol man always says.
0 2016/02/24 18:08:55
Pulled wiring harness, ac condenser, radiator, grill. I know it's more than need be but most of the truck will end up in scrap pile so tearing it off as i go.
Pulled wiring harness, ac condenser, radiator, grill. I know it's more than need be but most of the truck will end up in scrap pile so tearing it off as i go.
0 2016/02/24 18:07:46
Threw some water and a rag on the D250 i just started working on. Can't believe how well it cleaned up. Can't wait to get it on the road and see what a good car was will do for it.
Threw some water and a rag on the D250 i just started working on. Can't believe how well it cleaned up. Can't wait to get it on the road and see what a good car was will do for it.
0 2016/02/23 21:28:59
0 2016/02/21 14:42:08
0 2016/02/18 21:31:25
0 2016/02/16 09:42:49
0 2016/02/14 17:34:36
Or a clutch pedal that hooks up like this, i have not but i could be wrong
Or a clutch pedal that hooks up like this, i have not but i could be wrong
0 2016/02/14 17:32:32
Unless yall have ever seen a master cylinder that mounts like this, i have not but i could be wrong
Unless yall have ever seen a master cylinder that mounts like this, i have not but i could be wrong
0 2016/02/14 17:30:44
Brand new LMC grill, and all the pedals I'll need for the Getrag swap in the D250 plus all hydraulics
Brand new LMC grill, and all the pedals I'll need for the Getrag swap in the D250 plus all hydraulics
0 2016/02/14 09:45:54