Dodge Diesel - Diesel Truck Resource Forums
1982 D150
1982 D150
0 2018/07/04 08:32:54
Happy 4th!
Happy 4th!
0 2018/07/04 08:12:46
0 2017/10/14 11:26:04
0 2017/10/14 11:26:03
0 2017/08/29 20:25:58
0 2017/08/29 20:20:59
0 2017/08/29 20:20:58
0 2017/08/29 20:20:57
0 2017/08/29 20:20:55
0 2017/08/29 20:20:53
0 2017/08/29 20:20:52
Factory bolt plate.
Factory bolt plate.
0 2017/08/22 17:20:00
Bracket spot welded to the brace.
Bracket spot welded to the brace.
0 2017/08/21 20:26:29
My brace and the factory bolt plate all welded up.
My brace and the factory bolt plate all welded up.
0 2017/08/21 20:26:27
0 2017/08/21 20:26:26
Passenger seat mount bracket bolted up to properly locate the mount bracket under the floor.
Passenger seat mount bracket bolted up to properly locate the mount bracket under the floor.
0 2017/08/21 20:26:24
My brace welded to existing cab braces on three sides and the floor pan across the top. The two bigger holes aer where the bolts go through the seat bracket, floor pan, and in to weld nuts on the factory bolt plate.
My brace welded to existing cab braces on three sides and the floor pan across the top. The two bigger holes aer where the bolts go through the seat bracket, floor pan, and in to weld nuts on the factory bolt plate.
0 2017/08/21 20:26:21
The underside of the floor pan with the factory bolt plate removed. I sanded off the paint and rust in preparation for welding in my brace.
The underside of the floor pan with the factory bolt plate removed. I sanded off the paint and rust in preparation for welding in my brace.
0 2017/08/21 20:26:19
Cracks in the floor pan from the sheet metal flexing. Rear mounting area of the front passenger seat mount. This is under the black seat mount bracket.
Cracks in the floor pan from the sheet metal flexing. Rear mounting area of the front passenger seat mount. This is under the black seat mount bracket.
0 2017/08/21 20:26:18
Close up of above.
Close up of above.
0 2017/08/21 20:26:17
Factory bolt plate for the rear mount of the front passenger seat bracket from under the floor pan. The holes in the corners and middle are there so I can spot weld it to the brace I made.
Factory bolt plate for the rear mount of the front passenger seat bracket from under the floor pan. The holes in the corners and middle are there so I can spot weld it to the brace I made.
0 2017/08/21 20:26:11
0 2017/03/31 22:06:32
0 2017/03/31 22:06:31
0 2017/03/31 22:06:29
0 2017/03/31 22:06:28
0 2017/03/31 22:06:27
0 2017/03/31 22:06:26
1 2016/10/09 10:52:47
0 2016/10/09 10:47:31
0 2016/10/09 10:47:29
0 2016/10/09 10:46:48
Outside weld on frame.
Outside weld on frame.
0 2016/10/09 10:37:41
In with the new.
In with the new.
0 2016/10/09 10:33:38
Out with the bad.
Out with the bad.
1 2016/10/09 10:33:35
After all the scaley rust was cleaned out.
After all the scaley rust was cleaned out.
0 2016/10/09 10:33:33
Rust beetle frass.
Rust beetle frass.
0 2016/09/29 20:37:07
0 2016/09/29 20:32:07
0 2016/09/29 20:32:03
0 2016/09/29 20:32:01
0 2016/09/29 20:31:58