Dodge Diesel - Diesel Truck Resource Forums
Here it is removed. I used #5 metric Allen wrench to remove bolts. 5/16 to remove line from housing. I used extra care not to lose the little shims.
Here it is removed. I used #5 metric Allen wrench to remove bolts. 5/16 to remove line from housing. I used extra care not to lose the little shims.
0 2016/02/28 19:44:55
Here's what i used going back to stock. Same 5/16 wrench for the metal line, T30 Torx bit for stock screws that hold the housing on to the pump attached to a small ratchet wrench and the Torx bit with a 1/4 wrench for the tight space closest to the timing cover
Here's what i used going back to stock. Same 5/16 wrench for the metal line, T30 Torx bit for stock screws that hold the housing on to the pump attached to a small ratchet wrench and the Torx bit with a 1/4 wrench for the tight space closest to the timing cover
0 2016/02/28 19:48:10
All buttoned up
All buttoned up
0 2016/02/28 19:54:45
Another shot all buttoned up and what was taken out.
Another shot all buttoned up and what was taken out.
0 2016/02/28 19:56:08
Got it on the stand. Time to start disassembly and paint prepping
Got it on the stand. Time to start disassembly and paint prepping
0 2016/03/05 17:48:07
0 2016/03/15 06:13:18
Couldn't get a wrench or socket on the bottom bolt for power steering pump. Will pick up some crows feet tomorrow and get it off
Couldn't get a wrench or socket on the bottom bolt for power steering pump. Will pick up some crows feet tomorrow and get it off
0 2016/03/15 19:57:45
Just need to scrape wipe and tape then make our purdy
Just need to scrape wipe and tape then make our purdy
0 2016/03/15 19:58:30
Will paint most of the brackets and accessories black with the pump and valve covers
Will paint most of the brackets and accessories black with the pump and valve covers
0 2016/03/15 19:59:08
Pulling seat, center console and carpet.
Pulling seat, center console and carpet.
0 2016/03/16 18:28:37
All clean and wiped down with some industrial non residue glass cleaner
All clean and wiped down with some industrial non residue glass cleaner
0 2016/03/16 18:29:30
I used Fat Matt XXXtreme rattle trap. Thicker than Dynomat and went on very well. 1st time doing this so it was a learning experience
I used Fat Matt XXXtreme rattle trap. Thicker than Dynomat and went on very well. 1st time doing this so it was a learning experience
0 2016/03/16 18:30:19
I think it's turning out well
I think it's turning out well
0 2016/03/16 18:31:10
0 2016/03/21 08:30:11
0 2016/03/21 08:30:24
0 2016/03/21 08:30:33
0 2016/03/21 08:30:39
0 2017/01/07 23:28:57