Dodge Diesel - Diesel Truck Resource Forums
BC847's thread
BC847's thread
0 2018/12/29 12:19:04
0 2018/12/29 12:17:17
Removed center bearing and replaced
Removed center bearing and replaced
0 2018/12/28 09:35:27
Starter rebuilt complete
Starter rebuilt complete
0 2018/12/28 09:35:26
Reassembled motor
Reassembled motor
0 2018/12/28 09:35:26
0 2018/12/28 09:35:26
Opened parts packaging
Opened parts packaging
0 2018/12/28 09:35:26
Tested and functions as should
Tested and functions as should
0 2018/12/28 09:35:26
New Brushes installed in brush holder
New Brushes installed in brush holder
0 2018/12/28 09:35:26
Parts packaged for use
Parts packaged for use
0 2018/12/28 09:35:26
Cleaned up continued
Cleaned up continued
0 2018/12/28 09:33:57
Disassembled lower section of starter gear reduction housing
Disassembled lower section of starter gear reduction housing
0 2018/12/28 09:33:57
Starter nose removed, cleaned casing
Starter nose removed, cleaned casing
0 2018/12/28 09:33:57
Cleaned up parts with wire brush and lots of elbow grease
Cleaned up parts with wire brush and lots of elbow grease
0 2018/12/28 09:33:57
0 2018/12/28 09:29:23
0 2018/12/28 09:29:23
0 2018/12/28 09:29:23
0 2018/12/28 09:29:23
0 2018/12/28 09:28:55
0 2018/12/28 09:28:55
0 2018/12/28 09:28:55
0 2018/12/28 09:28:55
0 2018/12/28 09:28:54
0 2018/12/28 09:28:54
0 2018/12/28 09:28:54
0 2018/12/28 09:28:53
Wire brush and cleaned housing continued
Wire brush and cleaned housing continued
0 2018/12/28 09:25:56
Starter nose assembly removed and cleaned inside
Starter nose assembly removed and cleaned inside
0 2018/12/28 09:25:56
0 2018/12/28 09:25:55
Wire brush, and cleaned housing
Wire brush, and cleaned housing
0 2018/12/28 09:25:55
The rubber drain boot failed, and caused all the gunk to sit in the corner, and you can see how the moisture infiltrated and gunked up the metal
The rubber drain boot failed, and caused all the gunk to sit in the corner, and you can see how the moisture infiltrated and gunked up the metal
0 2018/12/28 09:15:38
Collection of Dust in the one corner due to rubber boot failure
Collection of Dust in the one corner due to rubber boot failure
0 2018/12/28 09:15:38
0 2018/12/28 09:15:38
Original starter taken out of the truck
Original starter taken out of the truck
0 2018/12/28 09:15:38
New brushes in their respective holders
New brushes in their respective holders
0 2018/12/28 09:15:38
Rebuild Kit opened up
Rebuild Kit opened up
0 2018/12/28 09:15:37
Removed the center bearing to replace it with the new one in the kit
Removed the center bearing to replace it with the new one in the kit
0 2018/12/28 09:15:37
The brush holder was seized in the housing, and it took some persuasion to get the motor out. It should have easily lifted out, but did not.
The brush holder was seized in the housing, and it took some persuasion to get the motor out. It should have easily lifted out, but did not.
0 2018/12/28 09:15:37
Lots of dust in the starter from the worn brushes
Lots of dust in the starter from the worn brushes
0 2018/12/28 09:15:36
New parts kit, including all seals, bearings etc, available from https://www.aspwholesale.com/
New parts kit, including all seals, bearings etc, available from https://www.aspwholesale.com/
0 2018/12/28 09:15:36