MBRP test pipe install - local help?
#1
Registered User
Thread Starter
MBRP test pipe install - local help?
Hey guys... First time poster, but have been reading DTR for quite a while now.
Ordered a ss MBRP cat delete pipe on Friday from pure diesel power and it's out for delivery this morning!
Anyhow, about a year ago I ordered Geno's muffler delete thinking I could pop it off myself and was sadly mistaken. The clamps had left too deep of indentations and I ended up having to take it into the local muffler shop (with my head held low) where they cut it out for me. I was pleased with the work they did and planned to take it back for the cat delete, but they told me they wouldn't do it - for obvious reasons.
So I was wondering if anyone was local to the Sachse, Garland, Wylie areas that might be interested in helping out in return for some cold ones and/or cold-hard greenbacks. I've read a couple threads on here where guys have said the cat popped off much easier than the muffler. Just thinking it might help to have an extra set of muscles and/or brains to keep me from doing something stupid... also, I would really like to get it off without chopping anything in the event that I ever have to put it back on.
Thoughts/comments/suggestions?
Oh yeah - it's an 06 2500 megacab 2wd.
And thanks a TON in advance for any advice/help - this is an awesome forum from what I've seen so far.
Ordered a ss MBRP cat delete pipe on Friday from pure diesel power and it's out for delivery this morning!
Anyhow, about a year ago I ordered Geno's muffler delete thinking I could pop it off myself and was sadly mistaken. The clamps had left too deep of indentations and I ended up having to take it into the local muffler shop (with my head held low) where they cut it out for me. I was pleased with the work they did and planned to take it back for the cat delete, but they told me they wouldn't do it - for obvious reasons.
So I was wondering if anyone was local to the Sachse, Garland, Wylie areas that might be interested in helping out in return for some cold ones and/or cold-hard greenbacks. I've read a couple threads on here where guys have said the cat popped off much easier than the muffler. Just thinking it might help to have an extra set of muscles and/or brains to keep me from doing something stupid... also, I would really like to get it off without chopping anything in the event that I ever have to put it back on.
Thoughts/comments/suggestions?
Oh yeah - it's an 06 2500 megacab 2wd.
And thanks a TON in advance for any advice/help - this is an awesome forum from what I've seen so far.
#3
Registered User
Thread Starter
Think I may have - moved it to 3rd gen engine and drivetrain. Rookie mistake.
https://www.dieseltruckresource.com/...html?p=2565698
https://www.dieseltruckresource.com/...html?p=2565698
#4
Registered User
http://lazarsmith.com/science.html
Give Mike with Lazarsmith a call. He can probably help ya or direct you where to get it. He is local to us.
..
Give Mike with Lazarsmith a call. He can probably help ya or direct you where to get it. He is local to us.
..
#6
Registered User
Thread Starter
Wow, Mike was AWESOME. Talked to me like I was a lifelong customer. Actually gave me the time of day! I definitely will be bringing him some business whenever I get to the next item on my list...
Thread
Thread Starter
Forum
Replies
Last Post
Arkapigdiesel
3rd Gen Engine and Drivetrain -> 2003-2007
9
09-01-2007 07:24 PM
Arkapigdiesel
3rd Gen High Performance and Accessories (5.9L Only)
18
04-20-2007 03:01 PM
PapaSmurf
Natl. and Regional Chapters / Special Events
7
05-30-2004 08:23 AM