Question is, how does one lub. the screws on the front jacks of a 5th wheeler. I have a 26ft Salem, by Forest River. It has elect. jacks which I run quite a bit. I can get at the miter gears on each side to lub. them by taking off the Sq. top plate. My fiver is 5 yrs. old and the two screws have never been lubricated. I can take out one jack at a time, by taking the whole assembly out. But did not want to do that if their was an easier way to lub the screws. If anyone has ever done this or if anyone knows anybody who has, Info on this matter would be very helpful.<br><br> Waam Holland, Mich.<br> 54 degrees at 4:30 PM EST