My buddy gave me a set of the Load Pro-25 springs. Have any of yall used these and if so how good did they work. I will need to buy the bigger u-bolts to make them work, man I wish my new truck came with factory overloads

http://www.hellwigproducts.com/produ...es/default.asp

 

They are a good spring overload I had the LP-35s on my 96 2500 and the problem I had with them is they were super stiff and really hard to adjust to get them were ya need them to be on when a load is applyed and not on all the time. Now the LP-25s might not be as stiff as the ones I had on my 96 beings that mine were for a 3500 truck But that aside great product and will defantly keep your truck sitff in the rear

 

Best thing I ever did to this truck.

 

[QUOTE=DanTana;1120321]Best thing I ever did to this truck.

Where and how much!!!

 

There is a spring shop in North Charlotte, NC ,,, I think it is Spring service & alignment, Statesville Road.

And was about $500.00. There took my spring packs apart and fabricated 2 full length spring for each pack. It did stiffen the ride empty but the ride with my 36' Cedar Creek was great.

This was full 3500's of wood chips.