I Was Just Wondering What The First Mods Any Of You Would Recomend Doing To A 95 12 Valve And A 01 24 Valve Any Thing Would Be Appreciated Thanks

 

I think the majority would agree Gauges first if they arent there already... then I would do exhaust and air intake to handle the EGTs and HP when you start adding....

 

anything you do is good but i learned the hard way i put injectors,turbo,fass 150 and a 160 hp quad my truck ran ok i wanted more i then got a triple dog with crazy larry first thing i did raising cain on the road i went my truck was bad but the power was to much for a stock tranny tore it out at alittle over 9000 milesso do what i wish i did start with tranny first call dusty at hts his tranny shifts hard made a world of differance in my 06 he is a good guy to talk to he stands behind his warranties give hts a call

 

1) guages 2) trans or clutch 3) head gasket 4) air intake and exaust 5) then add fuel 6) turbo if it were me i would build the truck before adding any power all the power in the world isnt worth crap if it never gets to the ground cause onece you add alittle you will want more the the truck will break every time you drive it and thats no fun at all