Was wondering if anyone has tried the waste gate mod on a 24 valve,drilling a hole in the divider or grinding it.I'm getting ready to try it on my 12 valve.If it works good for me i might try it on my brother in laws 99 24 valve.

 

do a search for member "wannadiesel". here did a good write up of the procedure. it is a very good idea to do. i think that ANYBODY who adds fuel should have it done.

dave

 

This mod will cost you the pulse separation advantages of a dual scroll exhaust housing. If you're close to stock or maybe even at or below 350hp, don't do it.

 

Here's some pics of mine drilled out, I also have a few pics of light porting I also did to the 14cm housing, It turned out really well,
Tim.

 

i wanting to know what this does this do for performance? i was under the impression that the more boost the more power.

 

More fuel = more power, you just have to make sure you have enough air to burn it.