im wanting to convert to a p-pump this summer, i found this kit from haisley.....http://haisleymachine.com/product_in..............any one know of any where else i could find one a little cheaper?

 

When I did my conversion I bought a used 97 motor complete with 215 pump, gear housing, brakets etc... Used what I needed and sold off the rest...

Bought some of the specialty parts from haisley to save me some work. Fuel lines, crank position sensor, fuel return line and fitting, and oil line.

By the time I sold all of the parts off of my truck and what was left of the 97 motor the conversion cost me $0.00!

 

Go over to competitiondiesel.com and they have a complete forum dedicated to this topic. Loads of info.

 

bnold, i never thought of that, ill check into that. I also checked on compd forum. I saw a post that you can use your 24V injectors you just have to change the pop off pressure....is that true thats the first time i heard that.

 

it will run without the pop pressures being changed and sound good but haven't changed mine so cant tell you how much power loss or gain their is