Here is 200 thou. it is barely off the seat ??? ???<br><br>Don~<br><br>

 

here is 300 thou.

Don~

 

And 400 thou

 

I set my valves last week. 13000 miles. Engin was cold. intake set at .0008, exhuast at .0017, or however that goes. Engin is much quiter. Is this to tight ,will it burn valves or what. These #,s where within tolerence from copy of book from dodge place.

 

The specs should be .010 and .020. If your cam is stock...adjust it to the specs above.<br><br>Don~

 

Don,<br><br>What are the specs on a stock cam? Or a marine cam? Just looking for Lifts, durations, and LSAs. Also, what ratio are the rockers?<br><br>John