How does this sound for a set of traction bars. Do I need anything else.

2 1.25" -12 tpi Jam Nut Left Hand Thread

2 1.25" -12 tpi Jam Nut Right Hand Thread

2 1.25" -12 tpi Tube Adapter 1.5 in ID - 2.0 in OD Left Hand Thread

2: 1.25" -12 tpi Tube Adapter 1.5 in ID - 2.0 in OD Right Hand Thread

2 Forged Chromolly 2.63" Ballistic Joint Bearing thru hole: 5/8'' Stud diameter / Thread Pitch: 1.25''- 12 tpi Left hand thread

2 Forged Chromolly 2.63" Ballistic Joint Bearing thru hole: 5/8'' Stud diameter / Thread Pitch: 1.25''- 12 tpi Right hand thread

1/4" or 3/16" plate for brackets

1.5" ID - 2.0" OD .250" wall DOM tubing

 

sounds about right. how much is that going to run you?

 

I dont no yet.
Everything but the plate and DOM tubing is $223.
I am hoping to keep it under $500.

 

http://www.suspensionconnection.com/...con/30995.html

this may be cheaper