SUNCOAST PRO-LOC TORQUE CONVERTERS
Re:SUNCOAST PRO-LOC TORQUE CONVERTERS
I only hear nice things about them myself. I have never used their product, but I have yet to see anybody bad mouth it or their service.<br><br> The few people I have talked with that are familiar with them all say the same thing, good product and great people to deal with.<br><br> Good luck and let us know how things go for you should you go with it.
Re:SUNCOAST PRO-LOC TORQUE CONVERTERS
To danlit. How did your other trucks shift as far as RPM drop between gears, lets say at half throttle. I love the way my engin sounds but can not stand it when the RPM,s do not drop much when shifting. Especially when pulling the 5er.
Re:SUNCOAST PRO-LOC TORQUE CONVERTERS
On my 02, the shifts are on the firm side if your light on the throttle, the way the rpms drop is like I have a standard shift.
The TQ is unreal , throw all the torque you want at it.
This is my everyday driver, The rpm range it stays comfortably
within 1100-1900, with tons of pull.
On the very bottom it seem a little slow with a stock truck , but if you have some mods, you`ll love it.
Danny
If you Read some of my early posts this month on transmissions, I finally found the problem, I was going into limp mode, a resistor did the fix.
The TQ is unreal , throw all the torque you want at it.
This is my everyday driver, The rpm range it stays comfortably
within 1100-1900, with tons of pull.
On the very bottom it seem a little slow with a stock truck , but if you have some mods, you`ll love it.
Danny
If you Read some of my early posts this month on transmissions, I finally found the problem, I was going into limp mode, a resistor did the fix.
Thread
Thread Starter
Forum
Replies
Last Post
04DEEZELRAM
3rd Gen High Performance and Accessories (5.9L Only)
3
Jan 23, 2008 07:13 AM
firestorm
Natl. and Regional Chapters / Special Events
25
Feb 26, 2006 07:50 PM



