Pyro probe replacement time?
#1
Guest
Posts: n/a
Pyro probe replacement time?
I'll be replacing an HX35 turbo soon, so I thought I'd ask about this, since it's in the vicinity --
Anyone have good advice on how long pyrometer probes last, and whether they should be replaced at regular intervals? I've got 15,000 miles on mine, and my EGT's don't get above 1250*F. I don't imagine it's due for replacement, but if it's a good idea to do it when putting a new turbo in. . . you see my point -- don't want it to fracture after another 20K and take out a turbine wheel.
I'm running an Autometer pyro & probe, pre-turbo, if that's any help.
Thanks for any input.
I.
Anyone have good advice on how long pyrometer probes last, and whether they should be replaced at regular intervals? I've got 15,000 miles on mine, and my EGT's don't get above 1250*F. I don't imagine it's due for replacement, but if it's a good idea to do it when putting a new turbo in. . . you see my point -- don't want it to fracture after another 20K and take out a turbine wheel.
I'm running an Autometer pyro & probe, pre-turbo, if that's any help.
Thanks for any input.
I.
#2
Registered User
Join Date: May 2002
Location: Aurora, Ontario
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
Re:Pyro probe replacement time?
You should be fine but maybe pull it and see if the tip is eroded if it is probably a good Idea to chage it if its pretty smooth still should be fine.
#3
Registered User
Join Date: Jul 2003
Location: South Bay Area, CA
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Re:Pyro probe replacement time?
Not really much to go on...but the '83 F250 I just sold had a banks turbo and pyro...it's been on for over 100k. I wouldn't consider it a wear item.
Thread
Thread Starter
Forum
Replies
Last Post
Crimedog
Performance and Accessories 2nd gen only
1
03-24-2004 11:25 PM
TinJim
3rd Generation Ram - Non Drivetrain - All Years
10
04-28-2003 09:50 PM