Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Modz

Thread Tools
 
Search this Thread
 
Old Jul 9, 2004 | 08:36 AM
  #1  
ramtd02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 1,245
Likes: 0
From: Edmonton, Alberta
Modz

I know i have prolly asked this before....but i am gonna ask one more time just too be sure.

If i run 4 inch exhaust, cool air intake, and the edge comp (untapped), will my tranny be able too hold upto that kinda pressure. I figure it will only put me upto the 310-320 bhp mark...but i dont really wanna chance it.

Thanks,

JL
Reply
Old Jul 9, 2004 | 12:09 PM
  #2  
mishkaya's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,110
Likes: 0
From: Iowa
Hello
I have the same truck as you essentially and I have no problems with the tranny slipping. I have a cool air intake, a 4" exhaust and an edge ez. It has only been about three weeks, but I think I would know if I were slipping the tranny. Hope this helps.
Mishkaya
Reply
Old Jul 9, 2004 | 12:17 PM
  #3  
ramtd02's Avatar
Thread Starter
Registered User
 
Joined: Jun 2004
Posts: 1,245
Likes: 0
From: Edmonton, Alberta
Thanks for the help.....did you notice alot of extra giddy up? And how is the mileage?
Reply
Old Jul 9, 2004 | 12:30 PM
  #4  
mishkaya's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,110
Likes: 0
From: Iowa
Too early to tell about mileage. So far it has dropped about 1mpg, but that is due to heavy acceleration. Difference is day and night from stock. Most noticeable is when accelerating after in O/D, very swift response. Can't wait for the Mach 1.5's to arrive!
Mishkaya
Reply




All times are GMT -5. The time now is 09:16 PM.