I know this is going to sound wierd or just a little trivial, but does anybody know the measurements for the pipe between the intercooler and turbo. There is the cast elbow that clamps to the charger, but I am talking about the pipe after that and between the intercooler. I have a 99 truck but bought a turbo for a 3rd gen and the cast elbow that clamps to the charger is made onto the housing of the 3rd gen charger. I have a piece of pipe that should make it work but am not sure of the o.d. measurement of the charge pipes on either the 2nd or 3rd gen trucks or if they are the same. Any info would be appreciated. Thanks.