Ok,,,,so I have been busy and done quiet a bit of mods in the last 3 weeks. First was a dtt noise filter and it worked YAH! The afe stage 2 is in, 4inch mbrp cool duals installed, 3 gauges on the pillar and an edge/att. dss went in yesterday and I will tackle the torque rod next week. Then I used the smarty and once I seen my f/p dropping to 0 at wot....the fass 150 went in today. 19 psi and can't drop it below 17 yet. I did notice my egt's go up after the fass install....more fuel equals more heat I guess. I have the v/b on order...an ati unit....the t/q is new but stock. I find the best combo so far is smarty on 6 and edge on 3......no smoke and plenty of get go.

I just wanted to thank this site and everyone on it for thier input and help and I guess my only question is......how long do u think the t/q will hold out......I am not crazy but alittle nuts at times lol

Also....any ideas on what is the best combo to run the smarty and edge on?

Cheers

 

You might want to start looking for new tires, since you will start burning rubber all over the place!!!

Joe