Found an easier method of pulling injectors. Had the usualy problem of not popping out easily. Didn't have the conduit/PVC, didn't have enough hardware to make a slide, didn't want to wait until Monday to get parts (don't start things on Saturday night). Just loosen the lock down nut until almost out, slip another lock down nut upside down on top. Then take a wheel lug nut on top and gently tighten down. Did have to readjust the lock down nut to get more reach (just remove and flip the bottom lock nut over. Far easier than tapping or trying the sliding hammer/socket method. And if you don't have the conduit it sure works slick. And love those 370's. Hope this may help someone else.

Paul