Dv
#2
Contact JR Adkins for the best price on delivery valves.
Adkins Diesel Performance
317-281-3130
AdkinsDieselPerformance@yahoo.com
Aaron (Dodgeman01) claims he got 90HP out of his ADP laser cut DV's.....I think that claim is a little high, but you should see about 60 or more in a 160 pump according to JR.
**copied and pasted from another thread**
Adkins Diesel Performance
317-281-3130
AdkinsDieselPerformance@yahoo.com
Aaron (Dodgeman01) claims he got 90HP out of his ADP laser cut DV's.....I think that claim is a little high, but you should see about 60 or more in a 160 pump according to JR.
**copied and pasted from another thread**
#3
Registered User
Join Date: Mar 2004
Location: springfield,oh
Posts: 801
Likes: 0
Received 0 Likes
on
0 Posts
i beleive he's asking how do they make them. i'm not real sure i think it's the inner peice that they modify, maybe the actual fins. before i installed mine i used a set of mics and checked the length and diameters of the inner and outer and couldn't find a difference
#4
Registered User
Thread Starter
Join Date: Nov 2005
Location: Lawrenceburg Ky
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Yep thats what I was wanting to know I know on my 191 and 131 the little round part below thw top of the innner piece is thinner on the 191 than it is on the 131 I was thinking they just cut that piece off maybe?
#7
Registered User
Join Date: Apr 2004
Location: Alaska
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Awww come on dean you don't need those 131's for anything anyway,
I got a die grinder if ya need one
It was my impression that the whole runner held more, course thats me tryin to picture this in my head,
but the midgets keep walkin infront of me
BC
I got a die grinder if ya need one
It was my impression that the whole runner held more, course thats me tryin to picture this in my head,
but the midgets keep walkin infront of me
BC