Was wandering if you dont have the wire tapped does it still provide boost fooling??? Also the custom tuning what all does this involve! Can you do a custom tune that revs to 4K or do you have to use quads? Also the fuel pressure gauge does it have one? I seen something on here awhile ago but cant remember what it said!

 

it does have a fp gauge but it doesn't come with the kit to hook it up.

 

The ADR should do boost fooling without tapping the wire, IMO...

 

what about the custom tuning

 

Whether or not you have the wire tapped, you will still get boost fooling. You can also do custom tuning I am sure, you will just be missing out on all the extra power.
mishkaya

 

Boost fooling works even in the off position with our without the Pulse.

You can do custom tuning without tapping the wire but, you are limited to the 65-70hp gain on PL02. You tune max timing advance, when the fueling starts kicking in based on TPS and when you reach max fueling based on TPS.

No other custom tuning parameters will change anything.

Fuel pressure transducers are shipping and will continue to ship.

I don't have the serial # at hand but, the latest Adrenalines shipping to warehouses are sent "transducer ready" meaning we can send you a wiring harness and the sending unit and supporting hardware and it works without sending it back.

There will be a note in the box stating the above.

 

and do they only cost $90 again or are people gonna have to pay again like the suckers that bought the fp senders to begin with?

 

I just realized that these forums would greatly benefit from an "Ignore" button.

I'll pay double if I can get one.

 

Yeah thats another thing i need to figure out! What do i need to buy for the furl pressure gauge to work!

 

would also benefit from vendors that actually honour warranty instead of charging twice for the same thing

 

I have offered PUBLICALLY to WARRANTY the part you say does not work.

Get an RMA#, send your old sending unit in and we will replace it with a brand new one.

That is called warranty replacement.

When you realize that you will be better off.

Until then, I still need an ignore button.

 

yeah Publicaly warranty another peice of crap that DOES NOT WORK
been that route still have the receipt in the e-mail ya want it?
oh and i was told they are on back order

 

But why would you warranty with i qoute "known FAULTY product??" That is exactly what the Quad tech told me. And the fact that they faulty senders are on back order for a week or so. Im still trying to figure out why a company would waste time and money producing a known faulty product?? Wouldnt it be beneficial for said company to bite the bullet, give people that have already spent money on a known faulty product something that works??? Or is there no longer a thing called CUSTOMER SERVICE??

 

I agree with you 100% it would probly cost less for them in the long run to replace it with something that works in the first place.

 

Hey Bjans how do you think ur new VP would do with my setup???