can i run 4k gsk with a 10 plate?

 

Yup !

Make sure you change you valve springs to 60 lb. springs.

: Eddie :

 

iv heard of people having problems geting the valve springs in, what is the best way to do this.

 

They are easy if you have the right spring compresser.
#5-#6 are a little tight.
Cover the opening with a rag so not to accidently drop a keeper down in engine.
Magnets are a great tool for this.
Just make sure each cyl. is at TDC before taking keepers out.
And that you Tq. head bolts back correctly.


: Eddie :

 

where do i get a spring compressor?

 

I'll have to look at the shop but I think mine is a lisle brand.

: Eddie :

 

I've found the KD 2078 to be the easiest one to use & fit in at the back cyl. You should get one for less than $30.00

Piers

 

thanks, that was the main info i was lookin for. i have been holding off putting my springs on till i found the best spring compressor. thanks again, mike