NCDTR #18 Forum for the North Carolina chapter #18

Schedule and details for this weekend.

Thread Tools
 
Search this Thread
 
Old 10-05-2008, 01:52 PM
  #1  
Administrator/Jarhead
Thread Starter
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
Post Schedule and details for this weekend.

Afternoon, NC #18...

All the info seems to be a little scattered about, so I'm putting this together. It's for me, too... I like structure and all...

Here's what I see so far:

10 Oct
Pre-event at Hooters, 463 Western Blvd. in Jacksonville, N.C. John P will be there at 4:30 to get a table, we need to start showing up at 5 or so.

The race is going at the "Coastal Plains Dragway", 4744 Highway 258, Jacksonville, N.C. from 8:00 P.M.-1:00 A.M.

So far, the weather channel puts Friday night at a 40% chance of rain, with a high of 78* low of 60*.


The questions:

What time do the gates open?

Usually they open the gates around 730pm

How much is racer fees, and spectator fees?

Racers pay 15, everyone else 10 (unless john worked out something else...)

Do we have a schedule on what class is going it what order?

Someone mentioned trying to set up an area for the DTR members so we'd all be together... ??


Nate is bringing a 10x10 canopy that will "BASE" our operations. I will try to get engineer tape to cordon off an area of operations.


Then, Saturday, the 11th, we are going to "Waynes Dyno and Performance" also located on Highway 258, at 3789 Richlands Hwy, Jacksonville, N.C. We will start showing up a little before 9, the event starts at 9. Remember, no alcohol, no 'F' word, and no stacks in the shop. You can make minor adjustments, but nothing major while you're on the rollers.

Weather channel: 30% chance of rain, high 80*, Low 59*.

Questions:

What is the fee for X pulls?

$45.00 for two pulls

$65.00 for four pulls


Are we going to cook? Who's bringing what?


We will be getting some pizzas from a local pizzeria (Michaelangelos) and will be "passing the hat" for that on Saturday morning.

The Flyer:

https://www.dieseltruckresource.com/...&postcount=153

Help me out with more details, I just got this info from other posts...

John, remember, last year when we tried to put Lary's hemi on the rollers, it scared it to death, and the dyno took a poo, right before Lloyd put his truck up... Make sure that we keep Mrs. Ellis's Aspen away from the building!

Ok, let me have it...

mad
Old 10-05-2008, 02:04 PM
  #2  
Registered User
 
05CTDN8's Avatar
 
Join Date: Apr 2006
Location: F-ville NC
Posts: 1,368
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by madhat
Afternoon, NC #18...

All the info seems to be a little scattered about, so I'm putting this together. It's for me, too... I like structure and all...

Here's what I see so far:

10 Oct
Pre-event at Hooters, 463 Western Blvd. in Jacksonville, N.C. John P will be there at 4:30 to get a table, we need to start showing up at 5 or so.

The race is going at the "Coastal Plains Dragway", 4744 Highway 258, Jacksonville, N.C. from 8:00 P.M.-1:00 A.M.

So far, the weather channel puts Friday night at a 40% chance of rain, with a high of 78* low of 60*.
Originally Posted by Nate
Dang you madhat you just jinxed us, now we are going to have a hurri-storm
The questions:

What time do the gates open?
Originally Posted by nate
Usually they open the gates around 730pm
How much is racer fees, and spectator fees?
Originally Posted by nate
Racers pay 15, everyone else 10 (unless john worked out something else...)
Do we have a schedule on what class is going it what order?

Someone mentioned trying to set up an area for the DTR members so we'd all be together... ??
Originally Posted by nate
I am bringing a 10x10 canopy that will "BASE" our operations. I will try to get engineer tape to cordon off an area of operations. If not, big trucks small cars ...nuff said


Then, Saturday, the 11th, we are going to "Waynes Dyno and Performance" also located on Highway 258, at 3789 Richlands Hwy, Jacksonville, N.C. We will start showing up a little before 9, the event starts at 9. Remember, no alcohol, no 'F' word, and no stacks in the shop. You can make minor adjustments, but nothing major while you're on the rollers.
Originally Posted by nate
for the stacks guys, remember if you can remove the T section we can hook up to your single pipe and still run your trucks.
Weather channel: 30% chance of rain, high 80*, Low 59*.

Questions:

What is the fee for X pulls?

Are we going to cook? Who's bringing what?


Help me out with more details, I just got this info from other posts...

John, remember, last year when we tried to put Lary's hemi on the rollers, it scared it to death, and the dyno took a poo, right before Lloyd put his truck up... Make sure that we keep Mrs. Ellis's Aspen away from the building!

Ok, let me have it...

mad
.............
Old 10-05-2008, 02:07 PM
  #3  
Administrator/Jarhead
Thread Starter
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
Thanks, Nate. I edited it in...
Old 10-05-2008, 02:49 PM
  #4  
Registered User
 
05CTDN8's Avatar
 
Join Date: Apr 2006
Location: F-ville NC
Posts: 1,368
Likes: 0
Received 0 Likes on 0 Posts
I forgot to mention I will have a jack, tools, and 4 wheeler there....just in case.
Old 10-05-2008, 02:55 PM
  #5  
Administrator/Jarhead
Thread Starter
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
I will also have a jack and tools. I may bring the compressor and genny with some air tools...
Old 10-05-2008, 03:55 PM
  #6  
Registered User
 
05CTDN8's Avatar
 
Join Date: Apr 2006
Location: F-ville NC
Posts: 1,368
Likes: 0
Received 0 Likes on 0 Posts
you better briong a trailer and a winch....

Hahahah you are too easy to set up!!!!
Old 10-05-2008, 04:18 PM
  #7  
Registered User
 
king d's Avatar
 
Join Date: Sep 2003
Posts: 890
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by madhat
Afternoon, NC #18...

All the info seems to be a little scattered about, so I'm putting this together. It's for me, too... I like structure and all...


Then, Saturday, the 11th, we are going to "Waynes Dyno and Performance" also located on Highway 258, at 3789 Richlands Hwy, Jacksonville, N.C. We will start showing up a little before 9, the event starts at 9. Remember, no alcohol, no 'F' word, and no stacks in the shop. You can make minor adjustments, but nothing major while you're on the rollers.

Weather channel: 30% chance of rain, high 80*, Low 59*.
mad
i have actually uttered the word Ford at waynes a time or 2 and he just rolled his eyes...
Old 10-05-2008, 05:08 PM
  #8  
Administrator/Jarhead
Thread Starter
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
I have a trailer... I did not mention that I am trailering my OL's truck up there? Just in case.... I have a come-a-long...

FORD!!!!
Old 10-05-2008, 06:40 PM
  #9  
1st Generation Admin
 
BC847's Avatar
 
Join Date: Jan 2005
Location: Buies Creek, NC
Posts: 4,597
Received 111 Likes on 57 Posts
Umm. . . . With my luck at the dyno things as of late, y'all'ed do well to get your name on the dyno list before me.


So does anyone know if they can do the crankshaft sensor thing on the 1st Gens?
Old 10-05-2008, 06:44 PM
  #10  
Registered User
 
05CTDN8's Avatar
 
Join Date: Apr 2006
Location: F-ville NC
Posts: 1,368
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by BC847
Umm. . . . With my luck at the dyno things as of late, y'all'ed do well to get your name on the dyno list before me.


So does anyone know if they can do the crankshaft sensor thing on the 1st Gens?
he should be able to....your talking about the "torque" tape right?
Old 10-05-2008, 06:50 PM
  #11  
1st Generation Admin
 
BC847's Avatar
 
Join Date: Jan 2005
Location: Buies Creek, NC
Posts: 4,597
Received 111 Likes on 57 Posts
Originally Posted by ShakinRedCTD
he should be able to....your talking about the "torque" tape right?
Yup, the issue seems to be that the 1st Gens have a frame cross-member that passes close under the crankshaft dampener and it gives many dyno operators a fit.
Old 10-05-2008, 08:17 PM
  #12  
Administrator
 
John_P's Avatar
 
Join Date: Mar 2002
Location: Holly Ridge, N.C.
Posts: 8,311
Likes: 0
Received 52 Likes on 50 Posts
Mark, you asked about food at "Waynes" on Saturday. We will be getting some pizzas from a local pizzeria (Michaelangelos) and will be "passing the hat" for that on Saturday morning.

TRAILER ISSUES- I will be towing my 24' flatbed trailer out to CPD on Friday night JUST IN CASE. Also, Brian Buchanan will have a trailer.

We will keep an eye on the weather but let's NOT be talking about rain! That has hurt us in past years.

--------
John_P
Old 10-05-2008, 08:23 PM
  #13  
Administrator/Jarhead
Thread Starter
 
madhat's Avatar
 
Join Date: Jun 2006
Location: Jacksonville, NC
Posts: 14,965
Received 19 Likes on 19 Posts
Thanks, John. Please look at my first post, the questions in red... some of them did not get answered...

Thanks, buddy.

Mark
Old 10-05-2008, 08:42 PM
  #14  
Administrator
 
John_P's Avatar
 
Join Date: Mar 2002
Location: Holly Ridge, N.C.
Posts: 8,311
Likes: 0
Received 52 Likes on 50 Posts
Originally Posted by madhat
Thanks, John. Please look at my first post, the questions in red... some of them did not get answered...

Thanks, buddy.

Mark
-----------------------------------------------------------------------
The schedule of classes has been posted by Mike D. in another thread Mark.
That is too long to re-write here again. We will try to have an area where we can park our trucks together, but that will depend on how many vehicles are there.

I think that is all of the questions.
Old 10-05-2008, 10:42 PM
  #15  
Chapter President
 
Mike D's Avatar
 
Join Date: Nov 2003
Location: Rural Hall, NC
Posts: 3,807
Likes: 0
Received 0 Likes on 0 Posts
The cost of the dyno is on the flyer. I think it was $45 for two pulls and $65 for four pulls. Hope that helps.


Quick Reply: Schedule and details for this weekend.



All times are GMT -5. The time now is 11:32 AM.