MD Chapter #33 get togethers/membership
Banned
Joined: Jan 2005
Posts: 2,997
Likes: 0
From: Baltimore, MD
smarty is always with me
LOL getting it back in the shop isnt a problem. i have a 4 wheel that will pull this truck around. i only know this from the last time i broke the tranny and i had to pull it around with the 4 wheeler.
seriously tho i will be tackling my no heat problem. i am not getting any coolant flow to my heater core. gotta fix that
LOL getting it back in the shop isnt a problem. i have a 4 wheel that will pull this truck around. i only know this from the last time i broke the tranny and i had to pull it around with the 4 wheeler.
seriously tho i will be tackling my no heat problem. i am not getting any coolant flow to my heater core. gotta fix that
Registered User
Joined: Jun 2005
Posts: 1,110
Likes: 0
From: Middle River, MD
I think you should have fixed that heat problem last weekend when it was warm outside 
I can make it up after 4pm on Saturday. My tranny guage is in though, couldn't wait so I spent a few hours cleaning out my garage so I could fit the front end of my truck in so I didn't have to lie in the rain. Took me forever because I'm a perfectionist, but it works well now.
Look forward to meeting some new folks on Saturday!
I can make it up after 4pm on Saturday. My tranny guage is in though, couldn't wait so I spent a few hours cleaning out my garage so I could fit the front end of my truck in so I didn't have to lie in the rain. Took me forever because I'm a perfectionist, but it works well now.
Look forward to meeting some new folks on Saturday!
Banned
Joined: Jan 2005
Posts: 0
Likes: 2
From: Port Deposit, MD
Thread Starter
Registered User
Joined: Oct 2006
Posts: 1,641
Likes: 0
From: Harpers Ferry WV
here is the link to the thread about the dinner get together.
https://www.dieseltruckresource.com/...d.php?t=127497
https://www.dieseltruckresource.com/...d.php?t=127497
Registered User
Joined: Jun 2005
Posts: 1,110
Likes: 0
From: Middle River, MD
I can only stop by to say hello, wife reminded me I have a dinner to attend on Saturday but I'll try and stop by for an hour or so. Is everyone meeting just after 4 after Scott gets off?
Banned
Joined: Jul 2005
Posts: 573
Likes: 0
From: Downingtown, PA/Milford, DE
well gentalmen lately we have been doing alot of wrenching time in scotts garage lately working on each others trucks. i have a new fuel pump coming in this week and we should be installing it with in the upcoming week so if you would like to come lend a hand or just sit around and drink a few, your more than welcome. the date will depend on when scott has some free time and is willing to lend the garage space.
we are also trying to setup some trips to the buck for some of the events one of our own chapter members (TJ -Getblown5.9) will be competing in the pulls this season. so lets all support him as a group. we might also try to get a dyno day together for the chapter.
i have also been working on a master list of members so that e-mails of when events are going to be happening can be sent out and no one is left in the dark. send a e-mail to mddtr33@yahoo.com if you would like to join the ranks
of the MD DTR chapter. we have made the App. e-mail friendly now!
we are also trying to setup some trips to the buck for some of the events one of our own chapter members (TJ -Getblown5.9) will be competing in the pulls this season. so lets all support him as a group. we might also try to get a dyno day together for the chapter.
i have also been working on a master list of members so that e-mails of when events are going to be happening can be sent out and no one is left in the dark. send a e-mail to mddtr33@yahoo.com if you would like to join the ranks
of the MD DTR chapter. we have made the App. e-mail friendly now!
)
Chapter President
Joined: Aug 2004
Posts: 3,481
Likes: 2
From: Kingsville, MD
Iron Worker i am trying to get ahold of B4wheeler he lives in Pasadena and you two could maybe ride together or follow one another.
Hey Brad i thought you were in Fla, glad to see ya back, how's the truck running?
TJ is your truck driveable?
We will be meeting at Wings to go Whitemarsh 11550 philadelphia rd, 21162 4pm
PM me for my cell # if you need it or Email MDDTR33@yahoo.com
Hey Brad i thought you were in Fla, glad to see ya back, how's the truck running?
TJ is your truck driveable?
We will be meeting at Wings to go Whitemarsh 11550 philadelphia rd, 21162 4pm
PM me for my cell # if you need it or Email MDDTR33@yahoo.com
Banned
Joined: Jan 2005
Posts: 2,997
Likes: 0
From: Baltimore, MD
truck is drivable...tranny just makes weird noises due to bad bearings.
i need to borrow a daily driver from someone to get to work for 2 weeks, once i do i can pull the tranny and get it fixed.
if anyone is coming and has access to scrap metal let me know. depending on what else is to be done, i may start making my drive shaft loops and u-joint shields.
i need, small angle (2x2), 6" steel pipe, and 1-2" flat bar. my neighbor can probably get most of it for me, but not before tomorrow afternoon.
i need to borrow a daily driver from someone to get to work for 2 weeks, once i do i can pull the tranny and get it fixed.
if anyone is coming and has access to scrap metal let me know. depending on what else is to be done, i may start making my drive shaft loops and u-joint shields.
i need, small angle (2x2), 6" steel pipe, and 1-2" flat bar. my neighbor can probably get most of it for me, but not before tomorrow afternoon.
Registered User
Joined: Oct 2006
Posts: 719
Likes: 0
From: Annapolis, Md
Iron Worker,
Give me a call at home or on my cell. I am in Pasadena at the end of Mountain Road.
I will be going to Wings-to-Go early for lunch, and to Scottts after that.
You can meet me somewhere on Rte 2, and you can follow me up.
443-562-5081(c) 410-437-8472(h)
Give me a call at home or on my cell. I am in Pasadena at the end of Mountain Road.
I will be going to Wings-to-Go early for lunch, and to Scottts after that.
You can meet me somewhere on Rte 2, and you can follow me up.
443-562-5081(c) 410-437-8472(h)
