My blower motor recently quit.I have changed the ignition switch,checked all the wires I can see in the column,including the big blue one.I changed the resistor thing it was melted but I still have no power to the fan .I hot wired the fan and it works fine.I check the circuit at the fuse panel and it has no power.Is there anything else to check.Does anyone know which wire is the hot one at the fan switch.If I cant figure this out I would like to just run a new wire to the fan switch so I can run it with the key on or off.The compressor is kicking in and cooling just no fan to blow out the cool air.If anyone knows anything else to try let me know,thanx