A few days ago I started up my truck to take it to the transmission shop. Noticed that the only gauge that was working was the rpm's everything else was
dead in the dash. In the display of the mileage, it read NO BUS, and in the top console above the windshield read CCD. The engine light also came on, plugged in the smart and had no communication with the computer. So I drove it the shop and noticed that it was stuck in third gear. Everybody that my transmission guy has talked to they have said that the computer is fried. Please any info would be appreciated, before I take it to the dealer!!!!

 

Disconnect both batteries for at least 1/2 and hour and see if it will reset. If not, they may be right about the 'puter.