The new rammer
The new rammer
Check it out, finally finished up my new bumper. Built it on a barrel in our laydown when i got off work early. quarter inch plate throughout, with 3/8 wall pipe for the grill guard. two grinders, an arc welder and a torch to make the tow hooks and bend the steel around the uprights. and like 80 hours. im a mechanic not a welder, so there was some pretty serious grinding. I also used it as a chance to mount a bypass filter setup i made with the hose press at work.
Let me know what you think. yes i know its getting a little redneck




Let me know what you think. yes i know its getting a little redneck




lol, im afraid it may be. i measured the frame height before and after and there was an inch difference...
weighed the truck on the way home last shift and it was 2400 on the front and 1900 on the rear when i was running empty.
weighed the truck on the way home last shift and it was 2400 on the front and 1900 on the rear when i was running empty.
Pitty your next Bambi----moose my do some damage but at least you have a chance---my Road Armour front + the Warm 16.5 winch are just over 300lbs on my second genner,i had to lift/mount with my floor jack,but the Kore Recon front spring/Bilstein 5100 shocks are fairly stiff.No problems so far in 4+ years.PS ---looking at a Buckstop Baja for my 2007 dually next year
Trending Topics
Ya thats a bit of a nuisance. Id offer some advice on lights, but the ones i got are waaaay to expensive. Very similiar to a cat hid light, and it makes it like daylight. eyes have to adjust when you have to turn em off.
Love those HIDS---but to much mutcho $$$$---a pair of LightForce 240 Blitz HID run 1400.00CAN

Nice bumpers guys. I'm just running the stock stuff, reason, I'm a cheap skate. If I hit a moose and had $9k, damage, I'll take the money and run. My truck isn't worth that much to start with.



