fletch99

I'm new to Dodge but thinking about a 2010 - 2500 - 6.7 Cummings - Auto - 2WD - One step up from the base model STX I think -

Could you give me an idea of what price range this truck would be in as well as anything I might not think of being new to Dodge.

I looked at a 2012 4DR 2500 6.7 Laramie with all the bells and whistles leather etc 59K But non the less a very impressive truck.

Am I correct that 2010 was when the 6.7 went into these trucks?

kry226

1. Dude, before some holy roller comes along...it's Cummins, not Cummings. They crucify people for that on the Cummins boards. Shhh...don't tell 'em I told you.

2. You're probably looking at lower to mid-$30K for a used 2010 with reasonable mileage.

3. The first 6.7 Cummins went into the 07.5 model year trucks.

Good luck, and do lots of research before you buy.

Jim W

Hi, welcome to the forum.
Yes, it is Cummins not Cummings GA.
Here is a PDF book on buying a Turbo Diesel Buying Guide. http://www.turbodieselregister.com/m...ersguide.phtml
This can be down loaded to read about buying a Dodge/Ram Turbo Diesel and what to look for. Read it over before buying.
Jim W.