DPF Deleting in 2014 for Dummies
I have read endless threads about the EPA and HS and Edge and Ebay and etc etc and My head now hurts because I don't understand what my options are as an owner of a:
2012 2500 Cummins Now in March 2014 If I want to do a DPF Delete today and manage codes etc via some tuner ... what options are still available to me ... Are HS, Smarty, Raceme ... any of the above ... a solution ? What is the reality ... assuming of course that I am a complete Dummy ? |
No dummy. They are getting hard to find or obtain. Best bet is to find the RaceME. It will probably be the easiest to get.
Sent from my Nexus 5 using Tapatalk |
The shop I go to can still get h&s, check out Northern Upfitters in Huntsville, ON. I don't know about the cost of shipping to the US.
|
lots of places can still get the H&S tuners, the hard part from my understanding is getting the "high sulphur unlock code" to delete isn't it?
|
Sorry, I don't have a definitive answer for that. I know with the unit that I bought, it has the high sulphur software in it, but at the same time, it had delete software. Best bet, call a shop/distributor, and ask. Best of luck.
|
no deletes for 2013 or 2014 yet. ECM is locked.
I unlocked my ECM and ran the bully dog setup for a few months. they don't support deletes though. decent power very stock like in all ways with more power Edge sent me a juice to beta test that is what I am running now. Level 6 with the juice timing is the best power you can find right now. It pull hard. RACE ME says they have a software solution but the truck randomly is dying on them and they have notfigured it all out. H&S has been quiet but I have not contatacted them direclty. |
The OP was actually asking about deleting a 2012.
Sent from my Nexus 5 using Tapatalk |
i like the H&S with custom MCC tuning. for the 2012 they have some options that are not available for 10-11 yet.
|
Originally Posted by cbrahs
(Post 3240296)
for the 2012 they have some options that are not available for 10-11 yet.
Sent from my Nexus 5 using Tapatalk |
for a 2012 just get the H&S race tuner IMO and an exhaust.
|
Originally Posted by 6.7L MegaCab
(Post 3240299)
What??? What options? I have been wanting to get MCC tuning for quite some time.
Sent from my Nexus 5 using Tapatalk |
Originally Posted by hognutz
(Post 3240303)
for a 2012 just get the H&S race tuner IMO and an exhaust.
|
A stock non-studded truck running 50psi. Ha, not gonna happen
|
Forgive my ignorance..... I've looked into getting one of the older H&S tuners for my 2012, but a lot of the ones I find are $$$$ expensive.... $1600 - $2000.
There is no way I can afford that.... Now I'm considering getting one of the New USA Tuners that H&S is selling, I'm pretty sure they don't support the deletes, but will they still help with mileage? Thanks |
It's possible it could help a smidge as they are providing a better tune over factory. It will probably not be anywhere near the mileage a deleted truck will get, unfortunately.
|
All times are GMT -5. The time now is 05:00 AM. |
© 2024 MH Sub I, LLC dba Internet Brands