Bulley side step
#1
Registered User
Thread Starter
Bulley side step
Picked up a Bulley side step last week and just went to install it on my 2011. At max extension it's about 1 1/4 inches too short and the step contacts the box sidewall. Anyone using one of these and how did you install it?
#2
Registered User
Thread Starter
Well if no one is using a bully side step what IS everyone using to reach into their box and how do you like it? Standing on the tire works but is a little "slippery when wet" and platform shoes doesn't cut it.
#3
Registered User
I use an AMP Research BED step that mounts to the rear driver side fender support. Here is the link.
http://www.amp-research.com/products...ories/bedstep/
Jim W.
http://www.amp-research.com/products...ories/bedstep/
Jim W.
#4
Registered User
Thread Starter
That is really a nice product, however I am looking for something that would mount in front of the rear wheel so I can reach my 5ver or goose disconnect and breakaway.
Thread
Thread Starter
Forum
Replies
Last Post
eights88
3rd Gen High Performance and Accessories (5.9L Only)
4
09-17-2007 04:37 PM
Diesel-Dan
3rd Gen Engine and Drivetrain -> 2003-2007
17
08-04-2006 09:51 AM
STATELINE
3rd Generation Ram - Non Drivetrain - All Years
7
08-05-2005 08:11 AM