BD Diesel Venom CP3 conversion question
#1
Registered User
Thread Starter
BD Diesel Venom CP3 conversion question
I purchased a BD Diesel Venom stock CP3 conversion for my 2020 Ram 3500 4x4 CC Tradesman and had a local reputable mechanic install the kit about 4 months ago. Well to make a short story my fuel line that was supplied in the kit cracked. It was the end going into the rail and it sprayed diesel everywhere. It is the #1 on supplied pic part# 1500735.
My question to yall is, has anyone else had this same issue??
Line #1 is where it’s spraying out.
My question to yall is, has anyone else had this same issue??
Line #1 is where it’s spraying out.
#2
Registered User
Thread Starter
Update-
Well BD told us that they are aware of the problem with the fuel line supplied and are sending a replacement and a clamp to hold it. That’s good news at least they are honoring their product.Fingers crossed it works.
Well BD told us that they are aware of the problem with the fuel line supplied and are sending a replacement and a clamp to hold it. That’s good news at least they are honoring their product.Fingers crossed it works.
The following users liked this post:
nothingbutdarts (02-23-2023)
Thread
Thread Starter
Forum
Replies
Last Post
Gregory Beinars
3rd Gen Engine and Drivetrain -> 2003-2007
0
02-13-2017 05:18 PM
cquestad
3rd Gen High Performance and Accessories (5.9L Only)
20
07-24-2010 10:23 AM
Luvnacumns
3rd Gen High Performance and Accessories (5.9L Only)
45
04-22-2007 10:23 AM
PanteraGSTK
3rd Gen High Performance and Accessories (5.9L Only)
22
02-23-2006 09:19 AM