So I've been fighting with the audio portion of my bluetooth set up for quite some time. I've got it all nice and plumbed into the stereo, but that doesn't work, of course, because I have the Infinity system. So because it ties in before the amp, you get extremely faint audio out of the speakers. So, I connected the audio outputs from the Parrot kit directly to the door speakers. The Parrot mutes the stereo via the mute wire on the back of the radio (don't tell me there isn't a mute wire, because there is one). The problem with hooking directly to the door speaker, is that the sound is still very faint and inaudible. So these speakers must either be a high resistance set up, or the door won't handle the higher frequencies or something. I've got it routed to an external 20 watt Uniden cb speaker, but it's still too quiet for some conversations. Will I get decent sound if I connect to the dash speakers? What can I do to get good audio volume out of the bluetooth kit? Amp an external speaker? Amp the signal and then connect it to one of the factory speakers? ???? Get a uconnect kit and use the tie in to the inputs from that? What the!?