I just saw this: http://www.crutchfield.com/p_113PW10...ck.html?tp=118 and thought it sounded like a good idea to add to my decent stock system to just give me some punch. If possible, I would like to bridge the amp and put it all through one of the subs in a custom enclosure I would build to fit the passenger rear seat storage bin.

Any thoughts or opinions??

 

Lets me just say this. Anything you add will be far better then were your at now. I have no experience with Kenwood but it will add more as long as you have good sealed boxes. My thought add only one sub so not to loose both storage bins. Bridge amp and see how it does and keep the other one for back up. I have always run 1 10" in my trucks and it more then enough to jump start your heart. You can put a 40 dollar sub in and it can sound real good. But build a bad encloser and they all will sound like dog poo.

 

Can I just run 3/4" plywood over the storage bin and mount the sub to it?

 

Your problem's gonna be you don't have any line level outputs on a factory radio. Just speaker outs from the built in amp. You don't want to run speaker outs to another amp, it'll sound crappy and eventually burn out the factory amp and the additional amp.