800 without. LoL so it'll haul 15,000lbs. So with the Reese Titan Hitch I'll stick with a Ranch Hand rear bumper ;D

Edited by Moderator

 

Here is another page for bumpers, looks like the rest but they are aluminum.....

 

[quote author=Demon_Customs link=board=17;threadid=8265;start=15#87977 date=1041633300]<br>800 without. ****, LoL so it'll haul 15,000lbs. So with the Reese Titan Hitch I'll stick with a Ranch Hand rear bumper ;D<br>[/quote]<br><br>The point I was trying to make wasn't to compare a hitch with a bumper. It was to point out the strength of the Reunel bumper which in my opinion is incomparable. ;D<br>

 

Try Southwest Fabricators. They are less costly, and I believe a better product than ranch hand Web Site <br>Southwestfabricators.com or 1 800 815 4348<br>

 

[quote author=Commatoze link=board=17;threadid=8265;start=15#88518 date=1041776115]<br>[quote author=Demon_Customs link=board=17;threadid=8265;start=15#87977 date=1041633300]<br>800 without. ****, LoL so it'll haul 15,000lbs. So with the Reese Titan Hitch I'll stick with a Ranch Hand rear bumper ;D<br>[/quote]<br><br>The point I was trying to make wasn't to compare a hitch with a bumper. It was to point out the strength of the Reunel bumper which in my opinion is incomparable. ;D<br><br>[/quote]<br><br>I understand and its a good point, I just think that for $800 it could atleast have lights in it. Where as I could get Ranchhand to build a bumper, then torch cut light holes and get the Piaa lights cheaper. Plus RanchHand rates there bumpers at 10,000. I wouldn't want to tow that much off any bumper..If your trailer is that big, get a Gooseneck

 

What you need is one of these. I designed it, buddy welded it together! See picture in attachment below.

 

Nice bumper Festus! I like the offensive posture. 8)

Looks like it's straight out of The RoadWarrior!!

 

HA!!! That's hilarious!! ;D :

 

[quote author=Berak link=board=17;threadid=8265;start=15#msg166883 date=1059748411]
Nice bumper Festus! I like the offensive posture. 8)

Looks like it's straight out of The RoadWarrior!!
[/quote]

Offensive is right!! ;D :P No offense, of course...

 

That is the ugliest thing I have ever seen. I am getting a maverick front end replacement for my 03'. i'm pickin it up next week. I am thinking about becoming a dealer for them. I am allready a dealer for Southwest Fabricators but you can never sell to much stuff. Check this out...........

www.mavtruk.com

 

[quote author=Cummins Luke link=board=17;threadid=8265;start=15#msg166948 date=1059752890]
That is the ugliest thing I have ever seen. I am getting a maverick front end replacement for my 03'. i'm pickin it up next week. I am thinking about becoming a dealer for them. I am allready a dealer for Southwest Fabricators but you can never sell to much stuff. Check this out...........

www.mavtruk.com
[/quote]


Now that is a good looking bumper...Let me know if you become a dealer ;D

 

[quote author=Berak link=board=17;threadid=8265;start=15#msg166883 date=1059748411]
Nice bumper Festus! I like the offensive posture. 8)

Looks like it's straight out of The RoadWarrior!!
[/quote]

Unfortunately, not straight oout of The RoadWarrior. Their stuff is too expensive for steel, never mind aluminum IMHO. I took AliArc's basic concept which was building something out of aluminm as that was the only good idea they have. I redesigned a bumper with greater height, added a rake for lower protection, and used heavier material and solid welds so it wouldn't fall apart if one was to hit a coyote. It worked out well. Attached is a picture of it on my '98 here in Edmonton.

 

[quote author=Festus link=board=17;threadid=8265;start=15#msg167148 date=1059777244]
[quote author=Berak link=board=17;threadid=8265;start=15#msg166883 date=1059748411]
Nice bumper Festus! I like the offensive posture. 8)

Looks like it's straight out of The RoadWarrior!!
[/quote]

Unfortunately, not straight oout of The RoadWarrior. Their stuff is too expensive for steel, never mind aluminum IMHO. I took AliArc's basic concept which was building something out of aluminm as that was the only good idea they have. I redesigned a bumper with greater height, added a rake for lower protection, and used heavier material and solid welds so it wouldn't fall apart if one was to hit a coyote. It worked out well. Attached is a picture of it on my '98 here in Edmonton.
[/quote]


LoL.....


Got Light?

 

$800 for the rear bumper is way to high. I am getting mine for the rear for $309.00
It retails for $594.00. Pays to know some people. The $309 is cost on the rear bumper. Thats the cowboy one, not the one with the big drop on it.-

The shop where i am buying the rear bumper said that they have the 03 front bumpers in but they look horrible on the trucks. They said that it does not fix up close enough to the lights. They said to wait a little while untill they make it better because the first runs do not look good.

They are getting $945 installed for thoses. No lights or anything.
Shop around, ever place i have called has given a different price.

 

Found these the other day when I was looking around for bumpers. I don't know much about them but I think that they look good. 8)

www.buckstop.biz