Dodge Diesel - Diesel Truck Resource Forums

3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Need Torque No For Hub Bolts

Thread Tools
 
Search this Thread
 
Old Apr 15, 2007 | 06:53 PM
Share
  #1  
ASHNBAK's Avatar
ASHNBAK
Thread Starter
Registered User
 
Joined: May 2005
Posts: 296
Likes: 0
From: LAKEWOOD, CA
Need Torque No For Hub Bolts
I posted this on the HELP board but didn't get anything. I had to remove the front rotor from my 3500 DRW. It's held on with three bolts on the back of the hub. Does anyone know what these three bolts should be torqued to?

Thanks.
Reply
0
Old Apr 15, 2007 | 08:34 PM
Share
  #2  
53 willys's Avatar
53 willys
Registered User
 
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
here you go...
Install the hub/bearing into the steering knuckle and tighten the bolts to 163 Nm (120 ft. lbs.) 4X2 LD. Or tighten the bolts to 176 Nm (130 ft. lbs.) 4X2 HD..
Reply
0
Old Apr 15, 2007 | 09:38 PM
Share
  #3  
ASHNBAK's Avatar
ASHNBAK
Thread Starter
Registered User
 
Joined: May 2005
Posts: 296
Likes: 0
From: LAKEWOOD, CA
Thanks Mark.
Reply
0
Old Apr 15, 2007 | 10:28 PM
Share
  #4  
53 willys's Avatar
53 willys
Registered User
 
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
no problem
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hub! Hub! Hub!
Rafter B
1st Gen. Ram - All Topics
4
Jan 11, 2009 08:40 PM
Rear Hub Bolts Loosening
biglar
24 Valve Engine and Drivetrain
11
Oct 22, 2006 04:17 PM
Rear Axle to Hub Bolts Failure
Joseph H. Smith
2nd Gen. Dodge Ram - No Drivetrain
4
Jul 18, 2006 08:03 PM
Hub retainer bolts, where to get them?
CRSmith
24 Valve Engine and Drivetrain
2
Nov 21, 2005 10:06 PM
Back to Subforum
3rd Generation Ram - Non Drivetrain - All Years
View Next Unread
Dually Beauty Rings




Advanced Search

All times are GMT -5. The time now is 12:52 PM.