3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Need a Pass side 4wd hub

Thread Tools
 
Search this Thread
 
Old Aug 21, 2007 | 02:12 PM
  #1  
DWK's Avatar
DWK
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 90
Likes: 1
Need a Pass side 4wd hub

My truck 2006 qc 4x4 is at the dealer with a bad pass side hub. Dealer called me this AM and confirmed the problem but then added the hub is no where to be found in North America. It does not show up as backordered just not avaiable. Anyone know of a dealer that may have one in stock??? I'm dead in the water without it.
Reply
Old Aug 21, 2007 | 02:30 PM
  #2  
vzdude's Avatar
DTR's 'Go to Guy'
 
Joined: Jan 2007
Posts: 3,811
Likes: 4
From: Indiana
Where are you located? Chicago shows 2 in the wharehouse! PM me your vin and I'll make sure , there are 2 options. They show 16 of the other, and tons of dealers with them in stock. If your dealer knew anything about anything, they would order it "car down". That will pull it out of the closest dealer's inventory or wharehouse and get it to them fast!
Reply
Old Aug 21, 2007 | 09:54 PM
  #3  
DWK's Avatar
DWK
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 90
Likes: 1
Originally Posted by vzdude
Where are you located? Chicago shows 2 in the wharehouse! PM me your vin and I'll make sure , there are 2 options. They show 16 of the other, and tons of dealers with them in stock. If your dealer knew anything about anything, they would order it "car down". That will pull it out of the closest dealer's inventory or wharehouse and get it to them fast!
Thanks,
right after posting this I called a buddy who runs a large shop. I told him the story and he said he would call me right back. Within 3 minutes he found one at a local dealer. (truck is 50 miles away). I called the Service GM and asked him what the deal was. He wanted to call me back after checking. He called back and said the DA parts guys knew one was at the dealer we called but they (parts) did not like to deal with them. the GM was a little upset to say the least. Funny thing is once he got involved parts changed their story and said one would be in tomorrow in the AM. I bet the parts guy has a little extra room in his shorts after this one. Especially since the regonal manager is a close friend and they all know it. They did everything but roll out red carpet when i got there. I have a feeling the GM will tell him what happened for fear I might tell. lol
$10 says my truck will be detailed and a full tank of fuel since I was without my truck for several days due to the parts guy.
Anyways thanks for checking. I knew someone on here had access to the parts database and I was going to use that ot get them in gear.
Reply
Old Aug 22, 2007 | 06:10 AM
  #4  
mjsandt's Avatar
Registered User
 
Joined: Feb 2006
Posts: 254
Likes: 1
From: Friendswood TX
In case anyone else needs one and doesn't mid buying a used hub bearing for cheap, I found this on ebay. Just thought I'd share my find

M Sandt

http://cgi.ebay.com/ebaymotors/Dodge...spagenameZWDVW
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rafter B
1st Gen. Ram - All Topics
4
Jan 11, 2009 08:40 PM
Hounddog
3rd Generation Ram - Non Drivetrain - All Years
29
Sep 24, 2007 04:50 AM
I SPEED
2nd Gen. Dodge Ram - No Drivetrain
15
Apr 8, 2005 03:31 PM
LarryJ
HELP!
6
Jan 11, 2005 07:10 PM
hotmopr
2nd Gen. Dodge Ram - No Drivetrain
8
Oct 6, 2004 05:46 PM




All times are GMT -5. The time now is 04:54 AM.