3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

hankook dynapro mt

Thread Tools
 
Search this Thread
 
Old Jan 4, 2008 | 12:25 PM
  #1  
adventuris's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 177
Likes: 0
From: ct
hankook dynapro mt

looking for some reports on how they are holding up , and is the ride and traction .
Reply
Old Jan 4, 2008 | 03:09 PM
  #2  
dezl's Avatar
Registered User
 
Joined: Sep 2007
Posts: 5
Likes: 0
I had a set on my chevy a while ago and I wasnt to fond of them.
Reply
Old Jan 4, 2008 | 03:14 PM
  #3  
alwaysfaded's Avatar
Banned
 
Joined: Nov 2005
Posts: 63
Likes: 0
From: nor cal 707
i have them and they suck will never buy again my d rated cooper stt lasted longer im going toyo next round
Reply
Old Jan 4, 2008 | 07:10 PM
  #4  
Megaramasaur's Avatar
Registered User
 
Joined: Oct 2006
Posts: 709
Likes: 0
From: San Antonio
they are the worst tires made. After 3k miles, they wore 2/3 of the tread off, Discount couldn't get them balanced, they bounced my teeth out at highway speeds.... my Dad put them on his truck, he's got 6k on his (smaller 265's) they have tad over half tread. I would take these tires if they were given to me.
'nough said... buy BFG KM2's... these are baddddddddd
Reply
Old Jan 4, 2008 | 08:37 PM
  #5  
cjdakota's Avatar
Registered User
 
Joined: Feb 2007
Posts: 53
Likes: 0
Thumbs down Tires

I had some Hankook dynapro rh-o4s and I immediatly returned them as they were bouncing at 60 and had 8 ounces on one tire.Store was teedoff but the rep said there were problems in china at the factory so went to another dealer and got some Cooper Chapperals 265s and really like them.
Reply
Old Jan 5, 2008 | 05:21 PM
  #6  
hawkster's Avatar
Registered User
 
Joined: Apr 2007
Posts: 46
Likes: 0
There's not much quality control in China and the materials vary from lot to lot. Not a good scenario for a tire. Also their speeds aren't as high as ours due to roads and junk cars, so why would they have knowledge to make a tire that would perform at 80 mph? Korea is a little better but I wouldn't trust them for tires. Maybe a cheap radio or floormat though!
Reply
Old Jan 6, 2008 | 10:49 AM
  #7  
B2hibry's Avatar
Registered User
 
Joined: Feb 2006
Posts: 46
Likes: 0
From: Parker, CO
I have a set and couldn't be happier. They look awesome, good traction, low noise, and actually made the ride a bit smoother. They are however MTs. If you think are going to get the same wear as an AT, you might want to throw on a drool cloth and helmet!
Reply
Old Jan 6, 2008 | 10:53 AM
  #8  
adventuris's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 177
Likes: 0
From: ct
hi , b2hibry how many miles do you have on them , i see you in CO how are they in the snow and ice .
Reply
Old Jan 6, 2008 | 06:00 PM
  #9  
B2hibry's Avatar
Registered User
 
Joined: Feb 2006
Posts: 46
Likes: 0
From: Parker, CO
They are great in the snow. Not too bad on ice. The cummins on ice isn't really desirable to begin with! I've had them for roughly 800 miles. These are on stock rims also.
Reply
Old Jan 6, 2008 | 09:13 PM
  #10  
Megaramasaur's Avatar
Registered User
 
Joined: Oct 2006
Posts: 709
Likes: 0
From: San Antonio
So you will need to buy new one's in another 800 miles... I'm dead serious about these crappy tires... I've never seen tires wear so fast.... They may look good, but when your buying tires every time you change your oil, there's something wrong
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sootindiesel
3rd Gen High Performance and Accessories (5.9L Only)
2
Jun 4, 2007 11:43 AM
skynyrd
3rd Gen High Performance and Accessories (5.9L Only)
16
Feb 13, 2007 04:13 PM
BLACKBIRD8200
3rd Gen High Performance and Accessories (5.9L Only)
11
Jan 8, 2007 06:59 PM
Stealth Mode
3rd Gen High Performance and Accessories (5.9L Only)
5
Nov 4, 2006 06:36 PM
scarecrow
Performance and Accessories 2nd gen only
8
Apr 26, 2006 08:24 AM




All times are GMT -5. The time now is 12:17 AM.