3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Front Door Weatherstrip!!!!!!!!!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 29, 2005 | 10:42 AM
  #16  
IA_James's Avatar
Registered User
 
Joined: Apr 2004
Posts: 513
Likes: 0
From: Iowa
Sure, be later though, wifey has to work the digital camera for me, and I'm getting ready to go to work. Should be this evening some time.
Reply
Old Nov 29, 2005 | 11:12 AM
  #17  
diesel_work's Avatar
Thread Starter
Registered User
 
Joined: Aug 2005
Posts: 35
Likes: 0
From: North Jersey
Thanks for all the info, I should have searched TSB's. The thing is I hope this fixes it, and that I will not need to make multiple trips to the dealer for the same repairs.
Reply
Old Nov 29, 2005 | 03:02 PM
  #18  
roadrat's Avatar
Registered User
 
Joined: Feb 2003
Posts: 218
Likes: 0
From: ottawa ontario
Here is a pic of the new rubbers that were just installed on my truck.



rob
Reply
Old Jan 20, 2006 | 10:17 AM
  #19  
davelinde's Avatar
Registered User
 
Joined: Nov 2003
Posts: 641
Likes: 0
From: Lake Nona, Florida
I just got interested in this since I'm at 35,100 miles right now. I'm torn (pun intended) between leaving this alone and rushing to push for the improved design. Mine rubs a little and the weatherstrip is slightly abraded but not torn. Is that enough of a failure to get this fixed?
Reply
Old Jan 20, 2006 | 01:52 PM
  #20  
roadrat's Avatar
Registered User
 
Joined: Feb 2003
Posts: 218
Likes: 0
From: ottawa ontario
Originally Posted by davelinde
I just got interested in this since I'm at 35,100 miles right now. I'm torn (pun intended) between leaving this alone and rushing to push for the improved design. Mine rubs a little and the weatherstrip is slightly abraded but not torn. Is that enough of a failure to get this fixed?
There is a tsb out for this problem if you decide you want it fixed, i would get a copy and bring it with you, that weatherstripping is only going to get worse.
You can get a copy here http://dodgeram.info/tsb/2004/23-008-04.htm

rob
Reply
Old Jan 20, 2006 | 02:55 PM
  #21  
davelinde's Avatar
Registered User
 
Joined: Nov 2003
Posts: 641
Likes: 0
From: Lake Nona, Florida
I stopped by a dealer near my office at lunch. The service manager said that if there's any damage at all he'll get me the new ones. Now I just need to schedule the appt in the next 900 miles.
Reply
Old Jan 20, 2006 | 03:22 PM
  #22  
ShaneCTD600's Avatar
Registered User
 
Joined: Aug 2005
Posts: 271
Likes: 0
Just called a few dealers near me and they said no way if you have more than 36k miles. Too bad for me since I now have 45k. Oh well the part only costs $15.
Reply
Old Jan 23, 2006 | 10:42 AM
  #23  
gonzy's Avatar
Registered User
 
Joined: Oct 2004
Posts: 33
Likes: 0
From: Mass.
Does anyone have the part # for the new seal with the knoch ctut in it?
Thanks
Tom
Reply
Old Jan 23, 2006 | 11:35 AM
  #24  
Flashman's Avatar
Registered User
 
Joined: Sep 2003
Posts: 119
Likes: 0
I assume this is fixed in the 2006s?
Reply
Old Jan 23, 2006 | 12:06 PM
  #25  
ShaneCTD600's Avatar
Registered User
 
Joined: Aug 2005
Posts: 271
Likes: 0
It's in the TSB http://dodgeram.info/tsb/2004/23-008-04.htm
Reply
Old Jan 23, 2006 | 05:12 PM
  #26  
DarkPaladin's Avatar
Registered User
 
Joined: Jun 2005
Posts: 104
Likes: 0
From: Fairbanks AK
My 05 has that problem too less than 6k on it and the driver's side is gettin tore up good now..
Reply
Old Jan 23, 2006 | 08:06 PM
  #27  
Windscreen's Avatar
Registered User
 
Joined: Feb 2004
Posts: 22
Likes: 0
From: Milwaukee, WI
Originally Posted by ShaneCTD600
The part number in the TSB must be out of date, as the design released under that TSB is at least one, if not two or three design iterations old. I had mine replaced in fall 2004, and the replacement was a lower profile weather strip, with one less strip. It still rubs and has more wind noise on the highway. The new part with the notch looks like the original three strip quiet design, but with clearance for the door "wing".

The old number probably supercedes, but I rather not find out by ordering that number and getting some old stock that was lying in a warehouse somewhere.

So, can anyone confirm the part number of the strip with the notch for the door? Left and right sides?

Steve
Reply
Old Feb 8, 2006 | 02:28 PM
  #28  
whitelightnin's Avatar
Registered User
 
Joined: Nov 2004
Posts: 39
Likes: 0
From: Tyler, TX
Will they do both drivers and passenger seals?
Reply
Old Feb 8, 2006 | 03:26 PM
  #29  
Artie04's Avatar
Registered User
 
Joined: May 2004
Posts: 78
Likes: 0
From: Tempe, AZ
There is an updated TSB 23-049-05 dated October 12, 2005. Here are part numbers from it

PARTS REQUIRED:
Qty. Part No. Description
1 **55277188AB** Secondary Door Seal - Standard Cab -Right
1 **55277189AB** Secondary Door Seal - Standard Cab - Left
1 **55277190AB** Secondary Door Seal - Quad Cab - Right
1 **55277191AB** Secondary Door Seal - Quad Cab - Left
Reply
Old Feb 8, 2006 | 03:28 PM
  #30  
roadrat's Avatar
Registered User
 
Joined: Feb 2003
Posts: 218
Likes: 0
From: ottawa ontario
Originally Posted by whitelightnin
Will they do both drivers and passenger seals?
They will do both if they show signs of damage or wear, so make sure they do

rob
Reply



All times are GMT -5. The time now is 05:57 AM.