EVIC Issues....
Thread Starter
Registered User
Joined: Jan 2006
Posts: 193
Likes: 2
From: Frozen Northern Minnesota, Darn Close To Where Perma-Frost Begins...
EVIC Issues....
Last night after engine start up I looked up at the EVIC and noticed the compass point was listed but all the other readouts where showing, ---*F, ---DTE, etc.
Drove it home, shut it off, restarted and all the readouts back on. This is the second time this has happened in the last 2 weeks. Both times the temp was about 25*F outside. Truck has about 67G's on the odometer and no add on ECM stuff.
Just some cold weather electron farts or pending EVIC doom ???
Any Ideas ????
Drove it home, shut it off, restarted and all the readouts back on. This is the second time this has happened in the last 2 weeks. Both times the temp was about 25*F outside. Truck has about 67G's on the odometer and no add on ECM stuff.
Just some cold weather electron farts or pending EVIC doom ???
Any Ideas ????
Registered User
Joined: Dec 2002
Posts: 1,055
Likes: 0
From: East Montpelier, VT.
Mine on my 05 has read -25* due to the weather up here and it still worked ok. Have not had problems where it doesn't READ anything.
Maybe a loose wire inside the overhead. I think it is only 2 screws and you can pop it off to check.
Maybe a loose wire inside the overhead. I think it is only 2 screws and you can pop it off to check.
Thread Starter
Registered User
Joined: Jan 2006
Posts: 193
Likes: 2
From: Frozen Northern Minnesota, Darn Close To Where Perma-Frost Begins...
We had a stretch of -28F for about a week back in February here and all worked fine. And all is fine now. Got the tools in the truck. She does it again. I do the NASCAR tear down on the spot......
Thread
Thread Starter
Forum
Replies
Last Post
caper11
3rd Gen Engine and Drivetrain -> 2007 and up
10
Nov 18, 2009 04:16 PM
Dale_K
3rd Generation Ram - Non Drivetrain - All Years
3
Oct 17, 2007 03:19 PM
TinJim
3rd Generation Ram - Non Drivetrain - All Years
8
Apr 25, 2003 08:16 AM