Van Aaken & Banks??
Won't work.
Tried it, truck wouldn't run with the VA on. It would idle ok, go over 1800 driving, and it would just fall flat on its face and start bucking.
Turn the VA off, and the truck had much less power, and the EGT's were 1500 in a heartbeat, but no go.
Tried it, truck wouldn't run with the VA on. It would idle ok, go over 1800 driving, and it would just fall flat on its face and start bucking.
Turn the VA off, and the truck had much less power, and the EGT's were 1500 in a heartbeat, but no go.
From my asking around, nothing seemed to work.
There has to be something in the Banks programming that makes it not work, plus being as how the Banks is pressure/timing, everything else out there adds one or the other plus duration, it gives you too much of either timing or pressure.
There has to be something in the Banks programming that makes it not work, plus being as how the Banks is pressure/timing, everything else out there adds one or the other plus duration, it gives you too much of either timing or pressure.
Thread
Thread Starter
Forum
Replies
Last Post
Arkangel77
3rd Gen High Performance and Accessories (5.9L Only)
1
Jan 8, 2006 12:00 PM
Buffalo
3rd Gen High Performance and Accessories (5.9L Only)
5
Nov 28, 2005 03:53 AM
BILL DODGE2003
3rd Gen High Performance and Accessories (5.9L Only)
2
Jun 4, 2004 09:19 PM
Copenhagenjunkie
Performance and Accessories 2nd gen only
2
May 19, 2003 08:04 AM



