Hello all

This is my first post...

I have had my PMT installed since May and it works great (V1.0.1.0)!!! I have the Pyro thermocouple probe mounted post turbo and wired to PYRO 1 as per the Bullydog technician that I spoke to before installation. I would like to install a second probe and wonder if anyone knows how I can purchase the second probe (part number etc.).

What are the recommended pre/post egt settings?

2005 2500 4x4 Quad with PMT... otherwise bone stock (my avg. fuel economy is 28mpg on extreme setting with my foot out of it!!!)

 

Hey Max,
Well I bought a PMT but had real probs with Bullys website and customer service......BUT..... I too asked this question after reading the info pack that came with the PMT and they do supply a Board made for two in puts....
The first person I spoke to told me I was totally crazy why would one need "TWO" in puts, and he had never had that request or ever heard of anyone doing it...... I asked why would bully supply a board made for two PYROS......<------ he coould not answer that one...
The next person quizzed me as to why I would even want such a thing...?????
And again I asked why would Bully supply the board made for two PYROS....
And again there was no answer..... So I bet you could get the same Pyro right from Bully themselves, but dont look for anyone on the phone to understand what it is your trying to do........ Best of luck......

 

My pmt came with two ports but only one probe and cable, maybe thats what your saying and i just mis understood the answer.

 

06 red....
Yes every PMT comes with a small box with two Pyro ports on it, but you only get one probe.... our question was where do we get a second pyro probe ....
And everyone "I" talked to thought I was crazy....

 

After reading it realize thats what you guys meant my bad.. Iam canadian lol... Just a question where would you put the other probe? pre-turbo or somewhere else..

 

06,
One is pre......
One is post.......

 

I was even toying with using the second probe for the tranny temp.