3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

new 07...what to do first.............

Thread Tools
 
Search this Thread
 
Old Dec 7, 2006 | 09:29 PM
  #1  
turbosonoma's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 36
Likes: 0
new 07...what to do first.............

i just got an new 07 laramie auto arriving in the new week or so, and i must start buying performance parts for it, what is the general "to do" list on these new trucks.... i intend to do everything i can to it, but still want it to remain driveable like it will be new and would like the mileage to remain liveable.....
advice?
suggestions?
first new diesel "toy" so im clueless.......
Reply
Old Dec 7, 2006 | 09:47 PM
  #2  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
Intake, guages, chips, exhaust, lift , tires, wheels, injectors, turbo(s), Cp3, FASS....... And the list goes on....

What do you want to do with this truck?? Performance, tow, drag, sled-pull.

Lots of options..

If you just want better economy. Get an intake, exhaust and chip.. That'll keep you happy until you want more.

Shane
Reply
Old Dec 7, 2006 | 09:55 PM
  #3  
turbosonoma's Avatar
Thread Starter
Registered User
 
Joined: Dec 2006
Posts: 36
Likes: 0
performance with a little bit of towing, well maybe more than a little bit, but nothing to to serious.
intake? exhaust? chip?
whats the good brands on this stuff?
im not used to big diesels yet, lol.
Reply
Old Dec 7, 2006 | 10:01 PM
  #4  
D.Wiggs's Avatar
Registered User
 
Joined: May 2006
Posts: 3,279
Likes: 0
From: Pittsburgh, Pa. & Columbus, OH.
I would definitely get the Smartyl BUT... to use it on level 9 you will need a fully built tranny (get it as bullet-proof as possible; you can never overbuild it enough!), new fuel pump, new CP3 pump, and then I would add injectors, head studs, intake, and gauges.
Reply
Old Dec 7, 2006 | 10:18 PM
  #5  
grantx5's Avatar
Registered User
 
Joined: Aug 2005
Posts: 508
Likes: 0
From: Puyallup, WA
I'd leave it alone and just enjoy the ride. Maybe tires, rims, but leave the drivetrain alone.
Reply
Old Dec 7, 2006 | 10:22 PM
  #6  
D.Wiggs's Avatar
Registered User
 
Joined: May 2006
Posts: 3,279
Likes: 0
From: Pittsburgh, Pa. & Columbus, OH.
A good rule of thumb is: "If it came from the factory; REPLACE IT!!!"
Reply
Old Dec 7, 2006 | 10:24 PM
  #7  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
If your not wanting to blow a whole load on a smarty or Bully DOg look into the quad zxt module it adds 65 hp and is nice. I started with that!!! As far as intake goes do you off road?? My 05 spend more time off road thatn on and I was cleaning it all the time so my 06 will have an enclosed box instead of an open one. Look into rokktech.com for a muffler good aeroturbine and free flowing not much louder than stock looking for louder get a peice of pice and ditch the muffler or MBRP..

Shane
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bobcat698
Performance and Accessories 2nd gen only
11
May 23, 2007 11:01 PM
1stTimeAround
3rd Gen Engine and Drivetrain -> 2003-2007
8
Oct 10, 2004 04:02 PM
bellyscraper
3rd Generation Ram - Non Drivetrain - All Years
6
Dec 20, 2003 01:52 PM
BulletMan
3rd Gen High Performance and Accessories (5.9L Only)
8
Oct 31, 2003 10:02 AM




All times are GMT -5. The time now is 06:30 PM.