just wondering if any one has stacked the xzillorator with other boxes

 

Hey james, fill in your sig dude, so we can see what you're driving. Why stack with the quad? Mine makes plenty of power with the 100 hp box, I am wondering where the clutch will die

 

thanks im not real good with these things by the way 0---30---60---100 xzliiorator i have not felt clutch slip yet these guys do all kinds of things here! no such thing as to much power:

 

james - you can send your box to quad and have it upgraded to the race 140hp version...

 

It would stack with the VA C3.2 (pure duration). At first I thought it might stack with the TST but I think it pushes the TST analog time fooling too far. So a pure duration box is your only choice there.

injectors and the quad would be cool though...

 

What about stacking it with the EZ? I just ordered my Quad 140hp box and I'd rather not put the EZ on the shelf but I know the Qzilla also raises fuel pressure some.

 

Quad and EZ both manipulate fuel pressure. not a good stack.

 

Thanks Doug. You are the BoxMan!!

 

i found the same thing with trying to stack the ts ramifier with my tst, to much timing ram like crap.

 

edge juice with predator works awesome

 

But so does the BDDL and people were stacking pressure boxes with it with good success?? My understanding was that the success was in terms of the stacked box pressure only being added to make up the difference between the BDDL and the pressure box addition as well as livening up the bottom end and helping out on EGT. This is what I noticed at least. Unless the Quad manipulates the fuel pressure differently and/or uses more pressure and timing that the BDDL did?

 

The Quad manipulates rail pressure by lying to the ECM. if you put two such boxes on there, then one boxe will lie to the other. Thus, two pressure boxes do not stack well because they are each attempting to manipulate the same signal.

The BDDL manipulates rail pressure by commanding it directly with ECM code which has been written to accomodate the use of a pressure fooling. Thus, the BDDL can be stacked with a pressure box without conflict.

 

Doug-

Thanks for the explanation - much appreciated!