3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Aftermarket headlight assembly's that work

Old Jul 13, 2008 | 12:43 PM
  #1  
rmalone's Avatar
Thread Starter
Registered User
 
Joined: Oct 2005
Posts: 208
Likes: 0
Aftermarket headlight assembly's that work

I am looking for some replacement headlight assemblys that perform better than the crap stock ones. There are quite a few projector types that I have found but most of them have the little led doo-dads on the bottom edge and they all look way to ricer for me (I'm not into bling), yes I could just not hook up the leds. But at $300 a pair I want to get some that actually work and are adjustable. My stock light don't adjust left and right, only up and down and I get flashed routinely while on dims, because my drivers side is aimed a bit toward oncoming traffic. Besides the light pattern on the stockers is terrible. I have tried the silverstar types of replacement bulbs and hate them.

So what would you fine gents recommend??
Reply
Old Jul 13, 2008 | 09:08 PM
  #2  
GhettoVaquero's Avatar
Registered User
 
Joined: Jan 2007
Posts: 256
Likes: 1
From: Big Oil Houston, TX
well, being a guy who bought them, they worked terrible and they burned out in a hurry. the worst part is the lights are built into the assembly so you just can't pull them off and get a new set from autozone. so i am back to the stockers.
Reply
Old Jul 13, 2008 | 09:53 PM
  #3  
Asher's Avatar
Registered User
 
Joined: Dec 2004
Posts: 557
Likes: 0
From: STL Missouri
I replaced my stockers with those cheap halo lights and couldn't be happier... I have not done anything to them other then hook them up and aim them... I haven't even replaced the cheap-o H1 bulbs that came with them and they are still performing flawlessly... they are 5x's better then the factory lights and having seperate high/low bulbs makes them even better and easier to aim correctly...

If I had to do it again, I wouldn't go any other way... I thought they would look to rice for me also but after installing them I am very happy with the look and have gotten many compliments on them...

Got mine on E-bay for like $120.00 for the set, but shipping was like $40...

They now have about 30,000 miles on them and look as good as the day I got them...



Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mossyoak11
3rd Gen High Performance and Accessories (5.9L Only)
3
Jan 18, 2010 10:08 PM
motochamp250
2nd Gen. Dodge Ram - No Drivetrain
1
Feb 1, 2008 03:47 PM
D.Wiggs
3rd Gen High Performance and Accessories (5.9L Only)
25
Dec 6, 2006 12:02 PM
Fiwa
3rd Generation Ram - Non Drivetrain - All Years
7
Nov 16, 2004 09:14 AM
rattle_rattle
2nd Gen. Dodge Ram - No Drivetrain
2
May 18, 2004 10:46 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:22 AM.