looking to level my truck, but cant decide. should i go with metal spacers or poly? or leveling springs? and why one over the other? any input would be helpful..... i'm afraid springs will sag which is why i'm asking about spacers first.

 

If you're happy with the way your truck rides now you can do spacers. But this is your chance to improve the ride by swapping in new coils. And a quality set of coils won't sag any more than the factory coils will.

 

I did poly spacers and upgraded to 1ton springs on my 97 3/4 ton used a floor jack it took about 3 hours never had any trouble with the spacers.

 

i'm ok with the ride of the stock springs. nice and soft, after owning an f350 it's a welcome feeling. is one better than the other (poly vs steel)? are there any negatives to poly, like sqeaking noises or compression?

 

Mine were fine I never noticed a difference and I'm very particular. I think my wife calls it being **** hehehe

 

I had steel spacers installed six months ago. No problems with factory shocks or springs, so far.