6spd Time Slips
Autos are weak! Ha! Row that bad boy.
The best 1/4 I have done is 12.68 @ 109.5 MPH. That run had a 60' of 1.79 secs and a 1/8th mile time of 8.155 @ 86.9 MPH.
This past weekend I ran at the 1/8 Mile OBX Bounty hunter race (first real run with the GDP bars) and turned a 8.061 @ 86.6 MPH with a 1.76 sixty foot time (held 2nd too long, so the mph was a tick soft). With a little less weight (too much fuel on board) and the install of my CP3 mods I'm thinking that 7's in the 1/8th are doable... especially in good air on a good track. BTW, that 1/8th time should expand out to a ~12.55 1/4 ET.
The best 1/4 I have done is 12.68 @ 109.5 MPH. That run had a 60' of 1.79 secs and a 1/8th mile time of 8.155 @ 86.9 MPH.
This past weekend I ran at the 1/8 Mile OBX Bounty hunter race (first real run with the GDP bars) and turned a 8.061 @ 86.6 MPH with a 1.76 sixty foot time (held 2nd too long, so the mph was a tick soft). With a little less weight (too much fuel on board) and the install of my CP3 mods I'm thinking that 7's in the 1/8th are doable... especially in good air on a good track. BTW, that 1/8th time should expand out to a ~12.55 1/4 ET.
Autos are weak! Ha! Row that bad boy.
The best 1/4 I have done is 12.68 @ 109.5 MPH. That run had a 60' of 1.79 secs and a 1/8th mile time of 8.155 @ 86.9 MPH.
This past weekend I ran at the 1/8 Mile OBX Bounty hunter race (first real run with the GDP bars) and turned a 8.061 @ 86.6 MPH with a 1.76 sixty foot time (held 2nd too long, so the mph was a tick soft). With a little less weight (too much fuel on board) and the install of my CP3 mods I'm thinking that 7's in the 1/8th are doable... especially in good air on a good track. BTW, that 1/8th time should expand out to a ~12.55 1/4 ET.
The best 1/4 I have done is 12.68 @ 109.5 MPH. That run had a 60' of 1.79 secs and a 1/8th mile time of 8.155 @ 86.9 MPH.
This past weekend I ran at the 1/8 Mile OBX Bounty hunter race (first real run with the GDP bars) and turned a 8.061 @ 86.6 MPH with a 1.76 sixty foot time (held 2nd too long, so the mph was a tick soft). With a little less weight (too much fuel on board) and the install of my CP3 mods I'm thinking that 7's in the 1/8th are doable... especially in good air on a good track. BTW, that 1/8th time should expand out to a ~12.55 1/4 ET.
You must have a huge right arm.
Thread
Thread Starter
Forum
Replies
Last Post
soulezoo
3rd Gen High Performance and Accessories (5.9L Only)
47
Jun 27, 2008 04:25 PM
jfranklin
3rd Gen High Performance and Accessories (5.9L Only)
12
Oct 12, 2007 11:01 AM
nobody
Competition / Pulls / OffRoad
27
Mar 15, 2007 08:46 PM
westport
3rd Gen Engine and Drivetrain -> 2003-2007
10
Nov 24, 2005 01:43 AM



